Built for bridge and strain-gauge measurement, this in-line USB signal conditioner accepts inputs from 1 mV/V to 400 mV/V. It is field-calibratable, samples at up to 1000 readings per second, and outputs digitized data over a USB serial connection. Best for load-cell, force, torque, and pressure-bridge data acquisition directly to a computer.
Built for bridge and strain-gauge measurement, this in-line USB signal conditioner accepts inputs from 1 mV/V to 400 mV/V. It is field-calibratable, samples at up to 1000 readings per second, and outputs digitized data over a USB serial connection. Best for load-cell, force, torque, and pressure-bridge data acquisition directly to a computer.
The IN-USBH field calibratable In-Line Signal Conditioner adds digital USB output to a mV/V pressure or load transducer. Free OMEGA PC software takes the data from the transducer directly to the digital domain, turning your laptop or Windows(R) tablet (with USB connection) into a virtual meter, chart recorder, and data logger. Export logged data to spreadsheet format for later viewing/analysis.
The PC-connected IN-USBH provides regulated excitation to the transducer, so that no external power supply is used. Sampling rates are adjustable up to 1000 Hz for dynamic or slow moving applications.
The IN-USBH is compatible with mV pressure and load sensors that meet the stated transducer requirements.
Features
Applications
| Resolution | Up to 5.5 significant figures |
| Minimum isolation | 2 MΩ @ 50 Vdc case to output terminations |
| Thermal error | 0.001% FSO/°C |
| Linearity error | 0.001% FSO |
| A to D conversion | 24 bit |
| Bandwidth | Up to 1000 updates per second typical (±3%) |
| Operating temperature range | -40 to 176°F (-40 to 80°C) |
| Connection, IN-USBH (transducer side) | PTIH-10-6P 6-pin twist-lock male connector |
| Mating connector (transducer side) | PT06F10-6S (sold separately) |
| Connection, USB side | 6' (2 m) USB 2.0 cable |
| Bridge sensitivity | 1 to 400 mV/V |
| Bridge resistance | 350Ω to 15,000Ω |
| Excitation voltage | 4.1 Vdc |
| Dimensions | ø0.88" (ø22 mm) Length: 4.00" (101 mm) 0.45" (11 mm) 0.7" (17 mm) USB cable length: 6' (2 m) |
| Weight | 7.1 oz (200 g) typical (in-line signal conditioner and USB cable) |
| Resolution | Up to 5.5 significant figures |
| Minimum isolation | 2 MΩ @ 50 Vdc case to output terminations |
| Thermal error | 0.001% FSO/°C |
| Linearity error | 0.001% FSO |
| A to D conversion | 24 bit |
| Bandwidth | Up to 1000 updates per second typical (±3%) |
| Operating temperature range | -40 to 176°F (-40 to 80°C) |
| Connection, IN-USBH (transducer side) | PTIH-10-6P 6-pin twist-lock male connector |
| Mating connector (transducer side) | PT06F10-6S (sold separately) |
| Connection, USB side | 6' (2 m) USB 2.0 cable |
| Bridge sensitivity | 1 to 400 mV/V |
| Bridge resistance | 350Ω to 15,000Ω |
| Excitation voltage | 4.1 Vdc |
| Dimensions | ø0.88" (ø22 mm) Length: 4.00" (101 mm) 0.45" (11 mm) 0.7" (17 mm) USB cable length: 6' (2 m) |
| Weight | 7.1 oz (200 g) typical (in-line signal conditioner and USB cable) |
