Made for converting a 4 mA to 20 mA control signal into a proportional pneumatic output, this I/P converter spans 2 psi to 60 psi (0.1 bar to 4.1 bar). It holds ±1% accuracy, ports through 1/4" NPT, and wires through a conduit connection. Works great for damper and cylinder actuation.
Made for converting a 4 mA to 20 mA control signal into a proportional pneumatic output, this I/P converter spans 2 psi to 60 psi (0.1 bar to 4.1 bar). It holds ±1% accuracy, ports through 1/4" NPT, and wires through a conduit connection. Works great for damper and cylinder actuation.
The IP610 and IP710 are electronic pressure regulators, converting a 4 to 20 mA signal to a proportional pneumatic output. Both units feature a compact housing, accessible ports and easy adjustments, making them ideal for space-constrained applications.
They also feature high tolerance for impure air and an integral volume booster, providing high flow capacity, increasing control speed in critical applications.
The IP610 is an economical unit, with precision air pressure regulation for actuators, valves, positioners and other final control elements.
Features
Applications
| Agency approvals | FM and CSA Intrinsically Safe; IP610: Class I, II, III, Div. 1, Groups C, D, E, F and G; IP610-D: Class I, Div. 1, Groups C and D |
| Input signal | 4 mA to 20 mA loop powered |
| Accuracy | Includes linearity, hysteresis and repeatability |
| Supply pressure sensitivity | 0.1% of span per psi (±0.02% for zero-based units) |
| RFI/EMI effect | 0.5% of span change in output pressure per EN 61000-4-3:1998, Amendment 1, Performance Criterion A |
| Air consumption | 1.8 SCFH typical (6.0 SCFH for zero-based units) |
| Temperature limits | -30 to 65°C (-20 to 150°F) |
| Media | Clean, dry, oil-free, instrument air, filtered to 40 microns |
| Pressure ports | 1/4 FNPT |
| Electrical connections | 1/2 FNPT conduit or DIN 43560 connector |
| Mounting | Direct wall, panel, or optional DIN rail |
| Housing | Chromate-treated aluminum with epoxy paint, NEMA 4X (IP65) rated |
| Elastomers | Buna-N |
| Trim | Stainless steel and zinc-plated brass |
| Pressure range | 2 psi to 60 psi |
| Impedance | 245 Ω mid-range |
| Supply air pressure | 65 psi to 150 psi |
| Flow capacity | 12 scfm @ 100 psig |
| Electrical connection | Conduit |
| Dimensions | 3.24" x 2.74" (82.3 mm x 69.6 mm) Height: 5.12" (130 mm) Mounting holes: #10-32 UNF-2B x 3/8" deep, 2 places In and out ports: 1/4-20 NPT, 4 places Wire leads: 22 GA., approx. 18" (457 mm) L |
| Weight | 1.3 lb (590 g) |
| Agency approvals | FM and CSA Intrinsically Safe; IP610: Class I, II, III, Div. 1, Groups C, D, E, F and G; IP610-D: Class I, Div. 1, Groups C and D |
| Input signal | 4 mA to 20 mA loop powered |
| Accuracy | Includes linearity, hysteresis and repeatability |
| Supply pressure sensitivity | 0.1% of span per psi (±0.02% for zero-based units) |
| RFI/EMI effect | 0.5% of span change in output pressure per EN 61000-4-3:1998, Amendment 1, Performance Criterion A |
| Air consumption | 1.8 SCFH typical (6.0 SCFH for zero-based units) |
| Temperature limits | -30 to 65°C (-20 to 150°F) |
| Media | Clean, dry, oil-free, instrument air, filtered to 40 microns |
| Pressure ports | 1/4 FNPT |
| Electrical connections | 1/2 FNPT conduit or DIN 43560 connector |
| Mounting | Direct wall, panel, or optional DIN rail |
| Housing | Chromate-treated aluminum with epoxy paint, NEMA 4X (IP65) rated |
| Elastomers | Buna-N |
| Trim | Stainless steel and zinc-plated brass |
| Pressure range | 2 psi to 60 psi |
| Impedance | 245 Ω mid-range |
| Supply air pressure | 65 psi to 150 psi |
| Flow capacity | 12 scfm @ 100 psig |
| Electrical connection | Conduit |
| Dimensions | 3.24" x 2.74" (82.3 mm x 69.6 mm) Height: 5.12" (130 mm) Mounting holes: #10-32 UNF-2B x 3/8" deep, 2 places In and out ports: 1/4-20 NPT, 4 places Wire leads: 22 GA., approx. 18" (457 mm) L |
| Weight | 1.3 lb (590 g) |
