Image is for reference only, refer to product info for complete details.
Built for converting a 4 mA to 20 mA control signal into a proportional pneumatic output, this I/P converter spans 2 psi to 100 psi (0.1 bar to 6.9 bar). It holds ±0.1% accuracy, ports through 1/4" NPT, and wires through a conduit connection. Best for final control elements in process loops.
Built for converting a 4 mA to 20 mA control signal into a proportional pneumatic output, this I/P converter spans 2 psi to 100 psi (0.1 bar to 6.9 bar). It holds ±0.1% accuracy, ports through 1/4" NPT, and wires through a conduit connection. Best for final control elements in process loops.
The IP610 and IP710 are electronic pressure regulators, converting a 4 to 20 mA signal to a proportional pneumatic output. Both units feature a compact housing, accessible ports and easy adjustments, making them ideal for space-constrained applications. They also feature high tolerance for impure air and an integral volume booster, providing high flow capacity, increasing control speed in critical applications.
The IP710 utilizes closed-loop pressure feedback circuitry to provide precise, stable pressure outputs, with immunity to vibration effects or mounting position and low air consumption, for demanding applications.
Features
Applications
| Agency approvals | FM and CSA Intrinsically Safe |
| Input signal | 4 mA to 20 mA loop powered |
| Supply pressure sensitivity | 0.1% of span per psi (±0.02% for zero-based units) |
| RFI/EMI effect | 0.5% of span change in output pressure per EN 61000-4-3:1998, Amendment 1, Performance Criterion A |
| Air consumption | 1.8 SCFH typical (6.0 SCFH for zero-based units) |
| Temperature limits | -40°F to 158°F (-40°C to 70°C) |
| Media | Clean, dry, oil-free, instrument air, filtered to 40 microns |
| Pressure ports | 1/4 FNPT |
| Electrical connections | 1/2 FNPT conduit or DIN 43560 connector |
| Mounting | Direct wall, panel, or optional DIN rail |
| Housing | Chromate-treated aluminum with epoxy paint, NEMA 4X (IP65) rated |
| Elastomers | Buna-N |
| Trim | Stainless steel and zinc-plated brass |
| Pressure range | 2 psi to 100 psi |
| Accuracy | ±0.10% span |
| Impedance | 10 kΩ |
| Supply air pressure | 105 psi to 130 psi |
| Electrical connection | Conduit |
| Dimensions | 5.12" (130) Height: 4.56" (115.8) Width: 3.24" (82.3) Mounting holes: #10-32 UNF-2B x 3/8" deep, 2 places In and out ports: 1/4-20 NPT, 4 places Wire leads: 22 GA. approx. 18" (457) long |
| Weight | 0.8 lb (370 g) |
| Agency approvals | FM and CSA Intrinsically Safe |
| Input signal | 4 mA to 20 mA loop powered |
| Supply pressure sensitivity | 0.1% of span per psi (±0.02% for zero-based units) |
| RFI/EMI effect | 0.5% of span change in output pressure per EN 61000-4-3:1998, Amendment 1, Performance Criterion A |
| Air consumption | 1.8 SCFH typical (6.0 SCFH for zero-based units) |
| Temperature limits | -40°F to 158°F (-40°C to 70°C) |
| Media | Clean, dry, oil-free, instrument air, filtered to 40 microns |
| Pressure ports | 1/4 FNPT |
| Electrical connections | 1/2 FNPT conduit or DIN 43560 connector |
| Mounting | Direct wall, panel, or optional DIN rail |
| Housing | Chromate-treated aluminum with epoxy paint, NEMA 4X (IP65) rated |
| Elastomers | Buna-N |
| Trim | Stainless steel and zinc-plated brass |
| Pressure range | 2 psi to 100 psi |
| Accuracy | ±0.10% span |
| Impedance | 10 kΩ |
| Supply air pressure | 105 psi to 130 psi |
| Electrical connection | Conduit |
| Dimensions | 5.12" (130) Height: 4.56" (115.8) Width: 3.24" (82.3) Mounting holes: #10-32 UNF-2B x 3/8" deep, 2 places In and out ports: 1/4-20 NPT, 4 places Wire leads: 22 GA. approx. 18" (457) long |
| Weight | 0.8 lb (370 g) |
