Best for direct surface heating, this 0.5 x 2" (12.7 mm x 5.1 cm) polyimide film flexible heater delivers 5 W at 5 W/in² on 28 V. Its etched Inconel 600 foil element is encased in chemical-resistant polyimide just 0.010" (0.25 mm) thick for low-profile mounting.
Best for direct surface heating, this 0.5 x 2" (12.7 mm x 5.1 cm) polyimide film flexible heater delivers 5 W at 5 W/in² on 28 V. Its etched Inconel 600 foil element is encased in chemical-resistant polyimide just 0.010" (0.25 mm) thick for low-profile mounting.
Features
Applications
| Series | KHLVA (rectangular, 28 V) |
| Material | Polyimide material encasing an Inconel 600 resistive foil element |
| Leads | PTFE-insulated (UL 1180), 12" (305 mm) long (wire gauge varies with heater); for strain relief, a silicone patch has been added |
| Voltage | 28 V |
| Watt density | 5 W/in² |
| Total wattage | 5 W |
| Watt density tolerance | ±10% |
| Dielectric strength | 1250 V AC for 1 sec |
| Operating temperature | -70 to 302°F (-57 to 150°C) |
| Pressure-sensitive adhesive (PSA) | No |
| Minimum bending radius | 0.032" (0.81 mm) |
| Dimensions | 0.5 x 2" (12.7 mm x 5.1 cm) Maximum thickness: 0.010" (0.25 mm) (except at lead wire exit) |
| Series | KHLVA (rectangular, 28 V) |
| Material | Polyimide material encasing an Inconel 600 resistive foil element |
| Leads | PTFE-insulated (UL 1180), 12" (305 mm) long (wire gauge varies with heater); for strain relief, a silicone patch has been added |
| Voltage | 28 V |
| Watt density | 5 W/in² |
| Total wattage | 5 W |
| Watt density tolerance | ±10% |
| Dielectric strength | 1250 V AC for 1 sec |
| Operating temperature | -70 to 302°F (-57 to 150°C) |
| Pressure-sensitive adhesive (PSA) | No |
| Minimum bending radius | 0.032" (0.81 mm) |
| Dimensions | 0.5 x 2" (12.7 mm x 5.1 cm) Maximum thickness: 0.010" (0.25 mm) (except at lead wire exit) |
