Made for direct surface heating, this 1 x 3" (2.5 x 7.6 cm) polyimide film flexible heater delivers 30 W at 10 W/in² on 28 V. Its etched Inconel 600 foil element is encased in chemical-resistant polyimide just 0.010" (0.25 mm) thick, with a pressure-sensitive adhesive backing for direct mounting.
Made for direct surface heating, this 1 x 3" (2.5 x 7.6 cm) polyimide film flexible heater delivers 30 W at 10 W/in² on 28 V. Its etched Inconel 600 foil element is encased in chemical-resistant polyimide just 0.010" (0.25 mm) thick, with a pressure-sensitive adhesive backing for direct mounting.
Features
Applications
| Series | KHLVA (rectangular, 28 V) |
| Material | Polyimide material encasing an Inconel 600 resistive foil element |
| Leads | PTFE-insulated (UL 1180), 12" (305 mm) long (wire gauge varies with heater); for strain relief, a silicone patch has been added |
| Voltage | 28 V |
| Watt density | 10 W/in² |
| Total wattage | 30 W |
| Watt density tolerance | ±10% |
| Dielectric strength | 1250 V AC for 1 sec |
| Operating temperature | -40 to 300°F (-40 to 149°C) |
| Pressure-sensitive adhesive (PSA) | Yes (3M 468MP or equivalent, typically 0.001" thick) |
| Minimum bending radius | 0.032" (0.81 mm) |
| Dimensions | 1 x 3" (2.5 x 7.6 cm) Maximum thickness: 0.010" (0.25 mm) (except at lead wire exit) |
| Series | KHLVA (rectangular, 28 V) |
| Material | Polyimide material encasing an Inconel 600 resistive foil element |
| Leads | PTFE-insulated (UL 1180), 12" (305 mm) long (wire gauge varies with heater); for strain relief, a silicone patch has been added |
| Voltage | 28 V |
| Watt density | 10 W/in² |
| Total wattage | 30 W |
| Watt density tolerance | ±10% |
| Dielectric strength | 1250 V AC for 1 sec |
| Operating temperature | -40 to 300°F (-40 to 149°C) |
| Pressure-sensitive adhesive (PSA) | Yes (3M 468MP or equivalent, typically 0.001" thick) |
| Minimum bending radius | 0.032" (0.81 mm) |
| Dimensions | 1 x 3" (2.5 x 7.6 cm) Maximum thickness: 0.010" (0.25 mm) (except at lead wire exit) |
