This compact RTD sensor uses a Pt100 platinum sensing element 4-wire with M12 connector, rated Class A per IEC 60751 over -58 to 248°F (-50 to 120°C) in a 3 x 13 mm probe. It suits industrial process temperature measurement.
This compact RTD sensor uses a Pt100 platinum sensing element 4-wire with M12 connector, rated Class A per IEC 60751 over -58 to 248°F (-50 to 120°C) in a 3 x 13 mm probe. It suits industrial process temperature measurement.
This RTD plug sensor is ideal for pressure vessel applications, pressurized containers and applications requiring a temperature sensor with an NPT mounting fitting. The single element design has a 1/8" (3.2 mm) diameter, 316 stainless steel probe that extends 0.51" (13 mm) or 0.94" (24 mm) from a 1/8 NPT mounting thread. The M12 connector assures a very reliable connection.
Features
Applications
| Series | RTDM12 Series |
| Type | Compact RTD Sensor |
| Sensing element | Pt100 platinum RTD |
| Nominal resistance | 100 Ω at 0°C |
| Accuracy | Class A per IEC 60751 |
| Temperature range | -58 to 248°F (-50 to 120°C) |
| Wiring | 4 wire |
| Sheath material | 316 SS |
| Connection | M12 Connector |
| Construction | Screw in RTD probe for direct immersion, one piece construction |
| Case Material | AISI 316 SS |
| Insulation Resistance | 100 MΩ with 100 V DC |
| Maximum Pressure | 580 psi (40 bar) |
| Process Connection | 1/8 NPT |
| Response Time | Less than 5 seconds |
| Marking | Each probe is permanently marked with the exact ohmical calibration test value at 0°C, the manufacturing date and a traceability code |
| Probe Diameter | 0.12" (3 mm) |
| Probe Length | 0.51" (13 mm) or 0.94" (24 mm) |
| Probe dimensions | 0.118 x 0.512" (3 x 13 mm) |
Click on a category to view a selection of compatible accessories with the Omega RTDM12 Series Compact RTD Sensor, Pt100, class A, 0.12 x 0.51" probe, 4-wire, 1/8" NPT, M12 connector.
| Series | RTDM12 Series |
| Type | Compact RTD Sensor |
| Sensing element | Pt100 platinum RTD |
| Nominal resistance | 100 Ω at 0°C |
| Accuracy | Class A per IEC 60751 |
| Temperature range | -58 to 248°F (-50 to 120°C) |
| Wiring | 4 wire |
| Sheath material | 316 SS |
| Connection | M12 Connector |
| Construction | Screw in RTD probe for direct immersion, one piece construction |
| Case Material | AISI 316 SS |
| Insulation Resistance | 100 MΩ with 100 V DC |
| Maximum Pressure | 580 psi (40 bar) |
| Process Connection | 1/8 NPT |
| Response Time | Less than 5 seconds |
| Marking | Each probe is permanently marked with the exact ohmical calibration test value at 0°C, the manufacturing date and a traceability code |
| Probe Diameter | 0.12" (3 mm) |
| Probe Length | 0.51" (13 mm) or 0.94" (24 mm) |
| Probe dimensions | 0.118 x 0.512" (3 x 13 mm) |
Click on a category to view a selection of compatible accessories with the Omega RTDM12 Series Compact RTD Sensor, Pt100, class A, 0.12 x 0.51" probe, 4-wire, 1/8" NPT, M12 connector.
