Used for temperature measurement, this RTD surface-mount sensor measures from -99 to 500°F (-73 to 260°C). In addition, it features self-adhesive, 4 wires, class A DIN platinum, 100 Ω, fast response, and ±0.27°F (±0.15°C) accuracy. It suits surface temperature monitoring on equipment, panels, and process components.
Used for temperature measurement, this RTD surface-mount sensor measures from -99 to 500°F (-73 to 260°C). In addition, it features self-adhesive, 4 wires, class A DIN platinum, 100 Ω, fast response, and ±0.27°F (±0.15°C) accuracy. It suits surface temperature monitoring on equipment, panels, and process components.
The SA1-RTD surface-mount RTD temperature sensor mounts on flat or curved surfaces and provides Class A accuracy for critical temperature monitoring applications. Based on a 2 x 2 x 0.8 mm thin-film platinum RTD and supplied in PFA-insulated 3- or 4-wire configurations (connectors optional), it can be customized for use in a wide variety of applications.
The sensor can be easily applied using its self-adhesive backing, or permanently mounted using OMEGABOND® cements.
Use the SA1-RTD to monitor chip, heat sink, and environmental temperatures in electronic devices; check piping or ducting temperatures; monitor motor and transformer core heat; test insulation capabilities; and check other applications in which surface and/or gradient temperatures need to be monitored or controlled.
Features
Applications
| Temperature Range | -99 to 500°F (-73 to 260°C) |
| Style | 4-wire |
| Minimum/Maximum Temperature: | -100 to 500°F (-73 to 260°C) continuous, 554°F (290°C) short-term (when cemented in place) |
| Termination | TA4F connector; pins 1 and 2, common 3 and 4 common |
| Sensing Element | 100 Ω at 32°F (0°C), temp coefficient of 0.00385 Ω/Ω/°C (IEC60751) |
| Material | PFA |
| Accuracy | ±0.06Ω at 0°C (DIN Class A) |
| Stability | Less than 0.2°C drift/year |
| Response Time | Less than 0.9 s (63% response time in water immersion), less than 2 s response time on a hot plate |
| Self-Heating Effect | 2.5 mW/°C |
| Lead Wire | 40" (1 m), 26 AWG stranded nickel-plated copper, PFA-insulated and jacketed cable |
| Temperature Range | -99 to 500°F (-73 to 260°C) |
| Style | 4-wire |
| Minimum/Maximum Temperature: | -100 to 500°F (-73 to 260°C) continuous, 554°F (290°C) short-term (when cemented in place) |
| Termination | TA4F connector; pins 1 and 2, common 3 and 4 common |
| Sensing Element | 100 Ω at 32°F (0°C), temp coefficient of 0.00385 Ω/Ω/°C (IEC60751) |
| Material | PFA |
| Accuracy | ±0.06Ω at 0°C (DIN Class A) |
| Stability | Less than 0.2°C drift/year |
| Response Time | Less than 0.9 s (63% response time in water immersion), less than 2 s response time on a hot plate |
| Self-Heating Effect | 2.5 mW/°C |
| Lead Wire | 40" (1 m), 26 AWG stranded nickel-plated copper, PFA-insulated and jacketed cable |
