Built for on/off media control, this high-pressure solenoid valve is a 2-way, normally-closed, direct-acting valve with a 1/4" port and a 0.005 Cv flow coefficient. Its 316 SS body with FEP seals handles up to 10000 psi (689 bar) and operates to 400°F (204°C). With a 120 V AC coil, it works great for liquid and gas service.
Built for on/off media control, this high-pressure solenoid valve is a 2-way, normally-closed, direct-acting valve with a 1/4" port and a 0.005 Cv flow coefficient. Its 316 SS body with FEP seals handles up to 10000 psi (689 bar) and operates to 400°F (204°C). With a 120 V AC coil, it works great for liquid and gas service.
The SVH-110 Series direct acting solenoid valves are normally closed valves that open when energized and close when de-energized. When the coil is energized the plunger lifts the piston off the valve seat, opening the valve. Upon de-energizing the coil, a spring closes the piston to seat it.
The normally open valve operates similarly, closing when energized and opening when de-energized. No minimum pressure is required.
The SVH-110 Series are used to control the flow of high pressure air, water, hydrogen, nitrogen and other gases or light liquids compatible with materials of construction. They are also suitable for cryogenic applications.
Features
Applications
| Fluid temperature | -350°F to 400°F (-212°C to 204°C) |
| Valve body | 316 SS |
| Piston/seal | 303 SS/FEP |
| O-ring seal | FEP |
| Spring | 302 SS |
| Plunger | 430 SS |
| Bonnet | 316 SS/430 SS |
| Bonnet retainer | 430 SS |
| Port connections | 1/4 NPT |
| Cv | 0.005 |
| Power | 22 Watts |
| AC inrush | 2.5 Amp @ 120 Vac |
| AC holding | 0.2 Amp at 120 Vac |
| Insulation | Class "H" |
| Duty | Continuous |
| Enclosure | NEMA 4 and 7 |
| Connection | 1/2 NPT, 18" (457 mm) leads |
| Coil voltage | 120 Vac |
| Port diameter | 0.019" (0.48 mm) |
| Maximum pressure | 10,000 psig |
| Dimensions | 2" (50.8) 2 7/8" (73) 3 7/8" (98) 1 1/8" (28.5) 2 1/4" (57) Dia. |
| Weight | 48 oz (3 lb) |
| Fluid temperature | -350°F to 400°F (-212°C to 204°C) |
| Valve body | 316 SS |
| Piston/seal | 303 SS/FEP |
| O-ring seal | FEP |
| Spring | 302 SS |
| Plunger | 430 SS |
| Bonnet | 316 SS/430 SS |
| Bonnet retainer | 430 SS |
| Port connections | 1/4 NPT |
| Cv | 0.005 |
| Power | 22 Watts |
| AC inrush | 2.5 Amp @ 120 Vac |
| AC holding | 0.2 Amp at 120 Vac |
| Insulation | Class "H" |
| Duty | Continuous |
| Enclosure | NEMA 4 and 7 |
| Connection | 1/2 NPT, 18" (457 mm) leads |
| Coil voltage | 120 Vac |
| Port diameter | 0.019" (0.48 mm) |
| Maximum pressure | 10,000 psig |
| Dimensions | 2" (50.8) 2 7/8" (73) 3 7/8" (98) 1 1/8" (28.5) 2 1/4" (57) Dia. |
| Weight | 48 oz (3 lb) |
