CAT4 Plus Cable Locator Avoidance Tool - Successor to CAT3 Plus, used to locate buried cables and reduce cable strikes, offering safer excavation.
CAT4 Plus Cable Locator Avoidance Tool - Successor to CAT3 Plus, used to locate buried cables and reduce cable strikes, offering safer excavation.
Discontinued!
This product has been discontinued and is no longer available.
There is no direct replacement, however we recommend the:
Not what you're looking for? Let’s do a search and help you find what you need.
Radiodetection CAT4 Plus Cable Locator Avoidance Tool offers the same locating performance as the Cat4 but with the addition of Depth measurement, allowing better identification of the route of buried utilities. The Radiodetection CAT4+ helps to locate buried cables; therefore, reducing the number of cable strikes and more safely. More models are available at the bottom of the page.
The Radiodetection Genny4 signal transmitter ads two additional modes of cable detection. Active frequency (33 Hz), when the transmitter is connected to a cable. The signal transmitter can also be switched to broadcast signal directly to ground (passive mode). In this mode, all underground cables and metallic non-ferrous object pick up the signal then re-emit it toward the surface. CAT4 locator finds underground utilities, when you scan an area in proximity to the signal transmitter. The broadcast mode is most popular was of searching for cables and non-ferrous metallic objects, before you dig. Construction companies use that more frequently. It does not pin-point to a cable location, but finds cables before excavation. Radiodetection CAT4 Plus is the best cable locator in its class. The CAT4 Plus Cable Locator requires a purchase of GENNY4 Transmitter for proper operation and location of cables, when utilizing all locating modes. Radiodetection is a registered trademark of SPX Corporation. Other CAT4+ models and their additional features:
Features
Applications
| Locate Performance | Sensitivity @ 1M |
| Power signals | 3 mA |
| Radio signals | 25 mA |
| Genny signals | 5 mA |
| Dynamic range | 120dB @ 10 Hz |
| Dynamic Overload protection | 40 dB @ 50 Hz (automatic) |
| Locate accuracy | ±10% of depth |
| Depth accuracy Line 5 | Line: 5% 0.1 m to 3 m (4in to 10 ft) Sonde: 5% 0.1 m to 7 m (4 in to 16 ft) |
| (on undistorted signal and with no adjacent signals) | -20 to 50°C |
| Operating temperature range | IP54 |
| Environmental protection | 2 x LR20 (D) 1.5 V alkaline |
| Batteries | Compatible with D type NiMH rechargeable batteries |
| Data interface | USB 2.0 |
| Warranty (years) | 1 |
| Locate Performance | Sensitivity @ 1M |
| Power signals | 3 mA |
| Radio signals | 25 mA |
| Genny signals | 5 mA |
| Dynamic range | 120dB @ 10 Hz |
| Dynamic Overload protection | 40 dB @ 50 Hz (automatic) |
| Locate accuracy | ±10% of depth |
| Depth accuracy Line 5 | Line: 5% 0.1 m to 3 m (4in to 10 ft) Sonde: 5% 0.1 m to 7 m (4 in to 16 ft) |
| (on undistorted signal and with no adjacent signals) | -20 to 50°C |
| Operating temperature range | IP54 |
| Environmental protection | 2 x LR20 (D) 1.5 V alkaline |
| Batteries | Compatible with D type NiMH rechargeable batteries |
| Data interface | USB 2.0 |
| Warranty (years) | 1 |
