DIN rail mountable, this single phase power controller has a thin profile of 0.85" (21.5 mm wide) and features a phase angle control with load capacity up to 15 A. Capable of close mounting up to eight units horizontally. In addition, it has soft-start and soft-down functions that allow the output to change slowly against a sudden change of input signal, suppressing the inrush current.
DIN rail mountable, this single phase power controller has a thin profile of 0.85" (21.5 mm wide) and features a phase angle control with load capacity up to 15 A. Capable of close mounting up to eight units horizontally. In addition, it has soft-start and soft-down functions that allow the output to change slowly against a sudden change of input signal, suppressing the inrush current.
Single phase power controller that has a thin profile design, that is capable is close mounting and that has soft-start and soft-down functions
Features
| Ratings Specifications | |
| Current | Maximum input: 24 mA DC 1 Cycle surge: 264 V AC rms |
| Maximum Load | Current: 15 A AC rms Voltage: 146 A |
| Isolation Resistance | 100 MΩ and above (500 V DC) |
| Dielectric Strength | 2500 V AC rms/1 minute |
| Temperature | Ambient: -4 to 140°F (-20 to 60°C) no icing and condensation Storage: -22 to 158°F (-30 to 70°C) no icing and condensation |
| Electrical Specifications | |
| Input | Impedance: 250 Ω ±20% Current range: 4 to 20 mA DC |
| Load Range | Voltage: 85 to 264 V AC rms (Sine wave) Current: 100 mA AC rms to maximum |
| On State Voltage Drop | Below 3 V AC rms (at maximum output power) |
| On State Leakage Current | Below 9 mA AC rms (load voltage 200 V AC rms, 60 Hz) |
| Power Adjustment Range | 0 to 95% |
| Load Voltage Frequency Range | 50/60 Hz auto-change 47 to 53 Hz/57 to 63 Hz |
| Current Consumption | Analog input: 5.1 mA AC rms (100 V AC rms, 50 Hz) External volume: 7 mA AC rms (100 V AC rms, 50 Hz) |
| Time | Responding: Below 1 cycle without soft start Ramp up/down time: Approximately 0.5 to 13 seconds |
| Standard | UL508 category No. NRNT2 |
| Dimensions | 5.35433 x 3.93701 x 0.85" (136 x 100 x 21.5 mm) |
| Weight | 9.17 oz (Approximately 260 g) |
| Ratings Specifications | |
| Current | Maximum input: 24 mA DC 1 Cycle surge: 264 V AC rms |
| Maximum Load | Current: 15 A AC rms Voltage: 146 A |
| Isolation Resistance | 100 MΩ and above (500 V DC) |
| Dielectric Strength | 2500 V AC rms/1 minute |
| Temperature | Ambient: -4 to 140°F (-20 to 60°C) no icing and condensation Storage: -22 to 158°F (-30 to 70°C) no icing and condensation |
| Electrical Specifications | |
| Input | Impedance: 250 Ω ±20% Current range: 4 to 20 mA DC |
| Load Range | Voltage: 85 to 264 V AC rms (Sine wave) Current: 100 mA AC rms to maximum |
| On State Voltage Drop | Below 3 V AC rms (at maximum output power) |
| On State Leakage Current | Below 9 mA AC rms (load voltage 200 V AC rms, 60 Hz) |
| Power Adjustment Range | 0 to 95% |
| Load Voltage Frequency Range | 50/60 Hz auto-change 47 to 53 Hz/57 to 63 Hz |
| Current Consumption | Analog input: 5.1 mA AC rms (100 V AC rms, 50 Hz) External volume: 7 mA AC rms (100 V AC rms, 50 Hz) |
| Time | Responding: Below 1 cycle without soft start Ramp up/down time: Approximately 0.5 to 13 seconds |
| Standard | UL508 category No. NRNT2 |
| Dimensions | 5.35433 x 3.93701 x 0.85" (136 x 100 x 21.5 mm) |
| Weight | 9.17 oz (Approximately 260 g) |
