Leonova Diamond Aligner is a system for quick and reliable shaft alignment, suitable for most combinations of machinery and coupled or uncoupled shafts, and designed for tough environments. The dual laser system comes with large, high precision digital CMOS linear image sensors, providing maximum accuracy. Package includes instrument, sensors, carrying case and other accessories.
Leonova Diamond Aligner is a system for quick and reliable shaft alignment, suitable for most combinations of machinery and coupled or uncoupled shafts, and designed for tough environments. The dual laser system comes with large, high precision digital CMOS linear image sensors, providing maximum accuracy. Package includes instrument, sensors, carrying case and other accessories.
Discontinued!
This product has been discontinued and is no longer available. There is no direct replacement. Don't worry, we have some options to help you find what you need:
Visit our Vibration category for similar products.
Or let's do a search and help you find what you need:
The IP65 rated sensors use digital signal processing to easily and automatically distinguish from interfering light sources. The sensors communicate with Leonova Diamond Aligner via Bluetooth, enabling hassle-free shaft alignment.
Dual axis high precision inclinometers measure the angle of rota-tion of both detector units at all times. This allows measurements in fully automatic mode, with much less than a half-turn of the shaft. The system comes with robust aluminum brackets and extendable chains for up to 480 mm (18") diameter shafts.
Features
*Note: The alignment sensors are identical with exception of the position of laser diode and the knob for adjustment of the laser on the ‘M' sensor.
| Display | TFT colour, 480 x 272 pixels, 4.3 inch widescreen, adjustable backlight |
| Main Processor | 400 MHz ARM |
| Memory | 256 MB RAM, 512 MB Flash, SD card 1GB expandable up to 8GB |
| Vibration Channels | 3 simultaneous |
| Frequency Range | 0 (DC) to 40 kHz |
| Resolution | Max. 25 600 lines |
| Vibration Transducer Input | < 24 Vpp. Transducer supply of 2,5 mA for IEPE(ICP) type can be set On/Off |
| Bearing Measuring Range | SPM HD:-30 to 110 dBsv(44000 transducer)dBm/dBc:-9 to 99 dBsvLR/HR:-19 to 99 dBsv |
| Bearing Resolution | 0,2 dB/HD, 1 dB dBm/dBc and LR/HR |
| Transducer Types | SPM 40000, 42000, 44000, probe and quick connector transducers |
| Display | TFT colour, 480 x 272 pixels, 4.3 inch widescreen, adjustable backlight |
| Main Processor | 400 MHz ARM |
| Memory | 256 MB RAM, 512 MB Flash, SD card 1GB expandable up to 8GB |
| Vibration Channels | 3 simultaneous |
| Frequency Range | 0 (DC) to 40 kHz |
| Resolution | Max. 25 600 lines |
| Vibration Transducer Input | < 24 Vpp. Transducer supply of 2,5 mA for IEPE(ICP) type can be set On/Off |
| Bearing Measuring Range | SPM HD:-30 to 110 dBsv(44000 transducer)dBm/dBc:-9 to 99 dBsvLR/HR:-19 to 99 dBsv |
| Bearing Resolution | 0,2 dB/HD, 1 dB dBm/dBc and LR/HR |
| Transducer Types | SPM 40000, 42000, 44000, probe and quick connector transducers |
