Uses an advanced silicon pressure sensor and state of the art encapsulation technology with HART communication protocol and is used to measure gauge pressure and has 0 to 36 psig.
Uses an advanced silicon pressure sensor and state of the art encapsulation technology with HART communication protocol and is used to measure gauge pressure and has 0 to 36 psig.
Discontinued!
This product has been discontinued and is no longer available. There are no replacement options.
We can help you find what you need:
The tri-clamp gauge pressure transmitter is a fully-sealed and fully isolated silicon pressure sensor.
Features
Applications
| Pressure Type | Gauge pressure |
| Process Connection | 2" Tri-Clamp |
| Wetted Material | 316 LLS |
| Measuring Range | 5.8 to 300 psig |
| Accuracy | ±0.2% F.S. |
| Stability | ±0.2% URL/5 years |
| Working Temperature | 40 to 185°F (-40 to 85°C) |
| Insulation Resistance | ≥20 M Ω at 100 VDC |
| Mounting Position E ffect | Apply to any position. Max value lower than 1.6 w.c. (400 Pa) can be corrected by zero clearing function |
| Working Humidity | 5 to 100% RH |
| Net Weight | Approx 3.43 lbs (1.55 Kg) |
| Protection Class | IP66 |
| Output Signal | Two wire, 4- 20 mA with HART |
| Power Consumption | ≤500 mW at 24 VDC, 20.8 mA |
| Pressure Type | Gauge pressure |
| Process Connection | 2" Tri-Clamp |
| Wetted Material | 316 LLS |
| Measuring Range | 5.8 to 300 psig |
| Accuracy | ±0.2% F.S. |
| Stability | ±0.2% URL/5 years |
| Working Temperature | 40 to 185°F (-40 to 85°C) |
| Insulation Resistance | ≥20 M Ω at 100 VDC |
| Mounting Position E ffect | Apply to any position. Max value lower than 1.6 w.c. (400 Pa) can be corrected by zero clearing function |
| Working Humidity | 5 to 100% RH |
| Net Weight | Approx 3.43 lbs (1.55 Kg) |
| Protection Class | IP66 |
| Output Signal | Two wire, 4- 20 mA with HART |
| Power Consumption | ≤500 mW at 24 VDC, 20.8 mA |
