The PP006D is a high impedance passive probe with a wide range of probing accessories. It is designed to give high impedance probing capability to a circuit when attached to a LeCroy Oscilloscope.
The PP006D is a high impedance passive probe with a wide range of probing accessories. It is designed to give high impedance probing capability to a circuit when attached to a LeCroy Oscilloscope.
Discontinued!
This product has been discontinued and is no longer available. There is no direct replacement. Don't worry, we have some options to help you find what you need:
Visit our Test Probes category for similar products.
Or let's do a search and help you find what you need:
Passive probes are the standard probe provided with most oscilloscopes. Typical passive probes provide a 10:1 attenuation and feature a high input resistance of 10 MΩ. Passive probes are designed to handle voltages of at least 400 V, some as high as 600 V. Teledyne LeCroy passive probes feature an attenuation sense pin which tells the oscilloscope to scale the waveforms automatically requiring no user input.
Each passive probe is recommended for a certain oscilloscope, using the right passive probe with the right oscilloscope means that the probe will be properly compensated across the entire bandwidth. Using probes with a different oscilloscope will only let you compensate for low frequencies.
| Bandwidth | 500 MHz |
| Input R | 10 MΩ |
| Input C | 12 pF |
| Attenuation | 10:01 |
| Maximum Voltage | 600 V |
| Recommended Oscilloscope | LT, WaveJet 300(A) ≤ 350 MHz |
| Bandwidth | 500 MHz |
| Input R | 10 MΩ |
| Input C | 12 pF |
| Attenuation | 10:01 |
| Maximum Voltage | 600 V |
| Recommended Oscilloscope | LT, WaveJet 300(A) ≤ 350 MHz |
