Compact yet powerful, this 6000-count pocket multimeter auto-detects voltage or resistance on startup. Moreover, it delivers accurate readings and fits easily in any tool bag or technician’s pocket for everyday testing.
Compact yet powerful, this 6000-count pocket multimeter auto-detects voltage or resistance on startup. Moreover, it delivers accurate readings and fits easily in any tool bag or technician’s pocket for everyday testing.
The PM-100 is a go-to-tool for quickly checking electrical supplies and basic continuity.
The PM100 is supplied in a convenient custom fabric zipper case and includes a 6000 count large digit LCD. The only control on this Pocket Multimeter is a single push button that switches the unit on and off, and cycles through the various tests. The PM100 powers up in “Auto" mode and checks for voltage and displays if present, if not, it will attempt to measure resistance.
Features
Manual modes are:
| Display | 6000-count LCD |
| Polarity | Automatic |
| Display Update Rate | 5 per second |
| Temperature Coefficient | Nominal 0.15 x (specified accuracy) per °C below 64°F (18°C) or above 82°F (28°C) |
| Intelligent Automatic Power Off | After 3 minutes of inactivity (approximately) |
| Noise Rejection | Common Mode Rejection Ratio: > 60 dB from 0 to 60 Hz when measuring ACV Common Mode Rejection Ratio: > 100 dB at 0 Hz, 50 Hz, and 60 Hz when measuring DCV Normal Mode Rejection Ratio: > 30 dB at 50 Hz and 60 Hz when measuring DCV |
| Operating Conditions | Temperature: 32 to 104°F (0 to 40°C) |
| Relative Humidity | 80% maximum for temperatures up to 88°F (31°C), decreasing linearly to 50% maximum at 104°F (40°C) |
| Altitude | 6500’ (2000 m) maximum |
| Pollution Degree | 2 |
| Storage Temperature | -4 to 140°F (-20 to 60°C), 0 to 80% relative humidity (non-condensing) |
| Battery | 3 V standard button battery (IEC-CR2032; ANSI-NEDA-54004LC) |
| Laser Classification | Low battery |
| Low battery | Below 2.4 V DC |
| Overvoltage Protection | 450 V DC/V AC RMS, 50/60 Hz |
| Measurement Category | Cat III, 300 V |
| Display | 6000-count LCD |
| Polarity | Automatic |
| Display Update Rate | 5 per second |
| Temperature Coefficient | Nominal 0.15 x (specified accuracy) per °C below 64°F (18°C) or above 82°F (28°C) |
| Intelligent Automatic Power Off | After 3 minutes of inactivity (approximately) |
| Noise Rejection | Common Mode Rejection Ratio: > 60 dB from 0 to 60 Hz when measuring ACV Common Mode Rejection Ratio: > 100 dB at 0 Hz, 50 Hz, and 60 Hz when measuring DCV Normal Mode Rejection Ratio: > 30 dB at 50 Hz and 60 Hz when measuring DCV |
| Operating Conditions | Temperature: 32 to 104°F (0 to 40°C) |
| Relative Humidity | 80% maximum for temperatures up to 88°F (31°C), decreasing linearly to 50% maximum at 104°F (40°C) |
| Altitude | 6500’ (2000 m) maximum |
| Pollution Degree | 2 |
| Storage Temperature | -4 to 140°F (-20 to 60°C), 0 to 80% relative humidity (non-condensing) |
| Battery | 3 V standard button battery (IEC-CR2032; ANSI-NEDA-54004LC) |
| Laser Classification | Low battery |
| Low battery | Below 2.4 V DC |
| Overvoltage Protection | 450 V DC/V AC RMS, 50/60 Hz |
| Measurement Category | Cat III, 300 V |
