This ultra-stable triple laser source is designed for high-precision testing of single-mode systems with an APC connector, at 1310, 1550, and 1625 nm. Typical applications include accurate fiber optic attenuation measurement, polarity verification, and fiber identification on critical telecom and broadband networks where zero warm-up and maximum stability are required.
This ultra-stable triple laser source is designed for high-precision testing of single-mode systems with an APC connector, at 1310, 1550, and 1625 nm. Typical applications include accurate fiber optic attenuation measurement, polarity verification, and fiber identification on critical telecom and broadband networks where zero warm-up and maximum stability are required.
Features
| Output Wavelength | Port 1: 1310, 1550 and 1625 nm Laser APC |
| Output Power | -7 dBm ±1 dB (at 9/125 μm) |
| Adjust Output Power | Adjustable over 7 dB in 0.01 dB steps |
| Short Term Stability | For 15 minutes, maximum ±3°C, zero warm-up, ORL < -25 dB:
|
| Stability Over Temperature | 0.2 dB maximum |
| Wavelength Initial Tolerance at 25°C | 6.5 nm |
| Spectrum Width FWHM | <1 nm (typical) |
| Wavelength Drift | 0.1 nm per °C (typical) |
| Reconnection Repeatability at 95% Confidence | 0.1 dB |
| Calibration Validity ISO/IEC 17025 | 3 years |
| Modulated Output | 270 Hz 1 kHz 2 kHz ±2% 12 Multi-Fiber ID tones |
| Autotest | Not supported for this model |
| Power | Battery External power via USB |
| Battery Types | 2 x AA (LR6) Alkaline 2 x AA NiMH (rechargeable via USB) |
| Battery Life | Typically 80 to 90 hours in Autotest with laser active |
| Auto Off | Selectable |
| Case | Polycarbonate (body) Rubber (edges and corners) Moisture resistance 1-meter drop tested |
| Temperature | Operating: 5 to 131°F (-15 to 55°C) Storage: -13 to 158°F (-25 to 70°C) |
| Relative Humidity | 0 to 95% |
| Warranty | 3 years |
| Dimensions | 7.5 x 4.1 x 1.4" (190 x 105 x 35 mm) |
| Weight | 0.92 lbs (0.42 kg) |
| Shipping Weight | 3.3 lbs (1.5 kg) |
| Output Wavelength | Port 1: 1310, 1550 and 1625 nm Laser APC |
| Output Power | -7 dBm ±1 dB (at 9/125 μm) |
| Adjust Output Power | Adjustable over 7 dB in 0.01 dB steps |
| Short Term Stability | For 15 minutes, maximum ±3°C, zero warm-up, ORL < -25 dB:
|
| Stability Over Temperature | 0.2 dB maximum |
| Wavelength Initial Tolerance at 25°C | 6.5 nm |
| Spectrum Width FWHM | <1 nm (typical) |
| Wavelength Drift | 0.1 nm per °C (typical) |
| Reconnection Repeatability at 95% Confidence | 0.1 dB |
| Calibration Validity ISO/IEC 17025 | 3 years |
| Modulated Output | 270 Hz 1 kHz 2 kHz ±2% 12 Multi-Fiber ID tones |
| Autotest | Not supported for this model |
| Power | Battery External power via USB |
| Battery Types | 2 x AA (LR6) Alkaline 2 x AA NiMH (rechargeable via USB) |
| Battery Life | Typically 80 to 90 hours in Autotest with laser active |
| Auto Off | Selectable |
| Case | Polycarbonate (body) Rubber (edges and corners) Moisture resistance 1-meter drop tested |
| Temperature | Operating: 5 to 131°F (-15 to 55°C) Storage: -13 to 158°F (-25 to 70°C) |
| Relative Humidity | 0 to 95% |
| Warranty | 3 years |
| Dimensions | 7.5 x 4.1 x 1.4" (190 x 105 x 35 mm) |
| Weight | 0.92 lbs (0.42 kg) |
| Shipping Weight | 3.3 lbs (1.5 kg) |
