This triple laser source is a general-purpose test source for single-mode systems with an APC connector, at 1310, 1550, and 1625 nm. Typical applications include fiber optic attenuation measurement, polarity testing, and fiber identification on critical systems.
This triple laser source is a general-purpose test source for single-mode systems with an APC connector, at 1310, 1550, and 1625 nm. Typical applications include fiber optic attenuation measurement, polarity testing, and fiber identification on critical systems.
Features
| Output Wavelength | Port 1: 1310, 1550 and 1625 nm Laser APC |
| Output Power | -3 dBm ±1 dB (at 9/125 μm) |
| Adjust Output Power | Adjustable over 7 dB in 0.01 dB steps |
| Short Term Stability | For 15 minutes, typical ±2°C, after warm up, ORL < -25 dB:
|
| Stability Over Temperature | 0.6 dB (typical) |
| Wavelength Initial Tolerance at 25°C | 20 nm |
| Spectrum Width FWHM | 3 nm (typical) |
| Wavelength Drift | 0.4 nm per °C (typical) |
| Reconnection Repeatability at 95% Confidence | 0.1 dB |
| Calibration Validity ISO/IEC 17025 | 3 years |
| Modulated Output | 270 Hz 1 kHz 2 kHz ±2% 12 Multi-Fiber ID tones |
| Autotest (not available for 470 and 540 nm LED sources) | Compatible with KI Autotest power meter port and matching λ |
| Power | Battery External power via USB |
| Battery Types | 2 x AA (LR6) Alkaline 2 x AA NiMH AA (rechargeable via USB) |
| Battery Life | Laser/LED source: 90/80 hours in Autotest, typical |
| Auto Off | Selectable |
| Case | Polycarbonate (body) Rubber (edges and corners) Moisture resistance 1-meter drop tested |
| Temperature | Operating temperature: 5 to 131°F (-15 to 55°C) Storage temperature: -13 to 158°F (-25 to 70°C) |
| Relative Humidity | 0 to 95% |
| Warranty | 3 years |
| Dimensions | 7.5 x 4.1 x 1.4" (190 x 105 x 35 mm) |
| Weight | 0.92 lbs (0.42 kg) |
| Shipping Weight | 3.3 lbs (1.5 kg) |
| Output Wavelength | Port 1: 1310, 1550 and 1625 nm Laser APC |
| Output Power | -3 dBm ±1 dB (at 9/125 μm) |
| Adjust Output Power | Adjustable over 7 dB in 0.01 dB steps |
| Short Term Stability | For 15 minutes, typical ±2°C, after warm up, ORL < -25 dB:
|
| Stability Over Temperature | 0.6 dB (typical) |
| Wavelength Initial Tolerance at 25°C | 20 nm |
| Spectrum Width FWHM | 3 nm (typical) |
| Wavelength Drift | 0.4 nm per °C (typical) |
| Reconnection Repeatability at 95% Confidence | 0.1 dB |
| Calibration Validity ISO/IEC 17025 | 3 years |
| Modulated Output | 270 Hz 1 kHz 2 kHz ±2% 12 Multi-Fiber ID tones |
| Autotest (not available for 470 and 540 nm LED sources) | Compatible with KI Autotest power meter port and matching λ |
| Power | Battery External power via USB |
| Battery Types | 2 x AA (LR6) Alkaline 2 x AA NiMH AA (rechargeable via USB) |
| Battery Life | Laser/LED source: 90/80 hours in Autotest, typical |
| Auto Off | Selectable |
| Case | Polycarbonate (body) Rubber (edges and corners) Moisture resistance 1-meter drop tested |
| Temperature | Operating temperature: 5 to 131°F (-15 to 55°C) Storage temperature: -13 to 158°F (-25 to 70°C) |
| Relative Humidity | 0 to 95% |
| Warranty | 3 years |
| Dimensions | 7.5 x 4.1 x 1.4" (190 x 105 x 35 mm) |
| Weight | 0.92 lbs (0.42 kg) |
| Shipping Weight | 3.3 lbs (1.5 kg) |
