Tramex Roof Inspecting Kit

Model: Roof Inspection Kit | Order No: RIK5.1

Tramex Roof Inspecting Kit-

Downloads:

More Tramex Products

Ask an Expert

Tramex Roof Inspecting Kit

Model: Roof Inspection Kit | Order No: RIK5.1

The perfect kit that allows for point-of-contact, non-destructive checking of moisture conditions, up to approximately 4 inches in depth. Featuring the handheld Tramex RWS Roof and Wall Scanner non-invasive impedance scanner and the Tramex CMEX II electronic moisture meter and Hygro-i ® relative humidity probe. This kit comes in a protective, heavy-duty carrying case with die-cut foam lining.

The perfect kit that allows for point-of-contact, non-destructive checking of moisture conditions, up to approximately 4 inches in depth. Featuring the handheld Tramex RWS Roof and Wall Scanner non-invasive impedance scanner and the Tramex CMEX II electronic moisture meter and Hygro-i ® relative humidity probe. This kit comes in a protective, heavy-duty carrying case with die-cut foam lining.

Discontinued!

This product has been discontinued and is no longer available.
This is the direct replacement:

Tramex Roof Inspecting Kit-

Tramex Roof Inspecting Kit

Model: RIK

The Roofing Inspector Kit allows for point-of-contact, non-destructive checking of moisture conditions in roofing and waterproofing systems up to approximately 4 inches in depth with the RWS Roof & Wall Scanner. The kit also allows for non-destructive measurement of moisture conditions in concrete decks and pin readings in wood decks and roofing materials, relative humidity readings, and ambient and dew point conditions using the Tramex CMEX5 digital moisture meter and probes. An infrared surface thermometer gives surface temperature. The Roofing Inspector Kit comes with an extension handle in a protective heavy-duty carrying case with die-cut foam lining

Learn More

Recommended Accessories

Tramex RH Short Probe Hygro-i-

Tramex RH Short Probe Hygro-i

RH Short Probe

Tramex HPW Hole Punch-

Tramex HPW Hole Punch

HPW

Tramex PTMCALSET Calibration Check Plugs, Pack of 3-

Tramex PTMCALSET Calibration Check Plugs, Pack of 3

PTMCALSET

Tramex HA21SP52 Hammer-Action Pin-Type Electrode-

Tramex HA21SP52 Hammer-Action Pin-Type Electrode

HA21SP52

Tramex Insulated RH Hood for Surface RH Testing-

Tramex Insulated RH Hood for Surface RH Testing

RHIH

Tramex RH Long Probe Hygro-i-

Tramex RH Long Probe Hygro-i

RH Long Probe

Tramex Hygro-i2 Probe for ASTM F2170, Pack of 6-

Tramex Hygro-i2 Probe for ASTM F2170, Pack of 6

Hygro-i

Tramex Roof Inspection Kit Offers

Features of RWS

  • For non-destructive moisture evaluation of Roofs, EIFS, foam insulation systems & other building envelope applications
  • To evaluate the extent of the moisture problem and help trace and pin-point its source
  • Multi-mode functions allowing for depth penetration and sensitivity selection
  • Fast and easy to operate giving instant clear readings

Features of CMEX II

  • Measures up to 6.9% Moisture Content in Concrete
  • Large clear backlit digital display
  • Hold function "freezes" meter reading when inspecting areas where the meter face is not visible
  • Attaches to a relative humidity Hygro-i® probe for in situ testing of concrete and ambient conditions
  • 7 inch Pin probe for deep penetration
  • 7% to 40% Moisture Content measurement in Wood using Pin-type probe attachment

Applications

  • Roofing
  • Waterproofing systems
  • Concrete decks
  • Wood decks
  • Ambient relative humidity
  • Dew point conditions

Tramex Roof Inspection Kit Specifications

RWS
Depth of Penetration 4" (100mm)
Reference Scale 0 to 100
CMEX II
Depth of Penetration in Concrete Approx. ¾" (20mm)
Moisture Content for Concrete 0 to 69%
Comparative for Gypsum Floor Screed 0 to 10
Reference Scale 0 to 100
Moisture Content for Wood (with Pin Probe) 7 to 40%
Relative Humidity (with Hygro-i® Probe) 0 to 99%
Humidity Accuracy 10 to 90%RH +/-1.8% @ 25°C / 77°F
General Specifications
Size of Kit 19.2 x 14.9 x 5.7" (487 x 380 x 145mm)
Weight 9.9 lbs
Power 3 x 9 volt PP3 Batteries (Included)
Click here for complete specifications on the Tramex Roof Inspection Kit

What's included with the Tramex Roof Inspection Kit

  • RWS - Roof and Wall Scanner & Telescopic Handle (For Use on Roofs)
  • CMEX II - Concrete Meter
  • Hygro-i® Probe
  • Hand Held Electrode with 7" Insulated Pins
  • Hole Punch
  • Infrared Thermometer

Click on a category to view a selection of compatible accessories with the Tramex Roof Inspecting Kit.

Tramex RH Short Probe Hygro-i RH Short Probe
The most advanced, resilient and reusable RH probe on the market today. Used on conjunction with CMEX II and MRH III moisture meters, the Hygro-i® relative humidity probes allow the user to perform in situ and hood type RH testing.



Tramex RH Long Probe Hygro-i RH Long Probe
The most advanced, resilient and reusable RH probe on the market today. Used on conjunction with CMEX II and MRH III moisture meters, the Hygro-i® relative humidity probes allow the user to perform in situ and hood type RH testing.



Tramex Hygro-i2 Probe for ASTM F2170, Pack of 12 Hygro-i
The all new Tramex Hygro-i2® Relative Humidity probe is the most advanced and resilient RH probe on the market today. Used in conjunction with the Tramex CMEX2 or MRH3 non-destructive moisture meters the Hygro-i2® probe provides measurements of humidity, temperature and dew-point in structural materials.



Tramex Hygro-i2 Probe for ASTM F2170, Pack of 100 Hygro-i
The all new Tramex Hygro-i2® Relative Humidity probe is the most advanced and resilient RH probe on the market today. Used in conjunction with the Tramex CMEX2 or MRH3 non-destructive moisture meters the Hygro-i2® probe provides measurements of humidity, temperature and dew-point in structural materials.



Tramex Hygro-i2 Probe for ASTM F2170, Pack of 6 Hygro-i
The all new Tramex Hygro-i2® Relative Humidity probe is the most advanced and resilient RH probe on the market today. Used in conjunction with the Tramex CMEX2 or MRH3 non-destructive moisture meters the Hygro-i2® probe provides measurements of humidity, temperature and dew-point in structural materials.



Tramex HPW Hole Punch HPW
For creating pilot holes for long pin probes in EIFS & Roofing Systems.



Tramex CALCRH Calibration Check Plate CALCRH
For use with CME, CME4, CRH, CMEX and CMEX II resistance meters.



Tramex PTMCALSET Calibration Check Plugs, Pack of 3 PTMCALSET
Set of 3 calibration check plugs for PTM, COM, MRH3, CMEX2 and WME resistance meters.



Tramex HH14SP200 Heavy-Duty Electrode with Cable and 7" Long Pins HH14SP200
For use with CMEX, MRH3 & PTM meters.



Tramex HA21SP52 Hammer-Action Pin-Type Electrode HA21SP52
Hammer-action pin-type electrode (With Cable And Pins) for use with CMEX II, MRH III, Professional.



Tramex Insulated RH Hood for Surface RH Testing RHIH
Non-destructive Relative Humidity testing for concrete and other floors and screeds, the Tramex Hygrohood is an insulated relative humidity hood used in conjunction with the CMEX2 and the MRH3 together with Hygro-I RH probes.



Ask a question about Tramex Roof Inspecting Kit

Customer Reviews for the Tramex Roof Inspection Kit

Tramex Roof Inspection Kit Offers

Features of RWS

  • For non-destructive moisture evaluation of Roofs, EIFS, foam insulation systems & other building envelope applications
  • To evaluate the extent of the moisture problem and help trace and pin-point its source
  • Multi-mode functions allowing for depth penetration and sensitivity selection
  • Fast and easy to operate giving instant clear readings

Features of CMEX II

  • Measures up to 6.9% Moisture Content in Concrete
  • Large clear backlit digital display
  • Hold function "freezes" meter reading when inspecting areas where the meter face is not visible
  • Attaches to a relative humidity Hygro-i® probe for in situ testing of concrete and ambient conditions
  • 7 inch Pin probe for deep penetration
  • 7% to 40% Moisture Content measurement in Wood using Pin-type probe attachment

Applications

  • Roofing
  • Waterproofing systems
  • Concrete decks
  • Wood decks
  • Ambient relative humidity
  • Dew point conditions
Show More...

Tramex Roof Inspection Kit Specifications

RWS
Depth of Penetration 4" (100mm)
Reference Scale 0 to 100
CMEX II
Depth of Penetration in Concrete Approx. ¾" (20mm)
Moisture Content for Concrete 0 to 69%
Comparative for Gypsum Floor Screed 0 to 10
Reference Scale 0 to 100
Moisture Content for Wood (with Pin Probe) 7 to 40%
Relative Humidity (with Hygro-i® Probe) 0 to 99%
Humidity Accuracy 10 to 90%RH +/-1.8% @ 25°C / 77°F
General Specifications
Size of Kit 19.2 x 14.9 x 5.7" (487 x 380 x 145mm)
Weight 9.9 lbs
Power 3 x 9 volt PP3 Batteries (Included)
Click here for complete specifications on the Tramex Roof Inspection Kit

What's included with the Tramex Roof Inspection Kit

  • RWS - Roof and Wall Scanner & Telescopic Handle (For Use on Roofs)
  • CMEX II - Concrete Meter
  • Hygro-i® Probe
  • Hand Held Electrode with 7" Insulated Pins
  • Hole Punch
  • Infrared Thermometer

Click on a category to view a selection of compatible accessories with the Tramex Roof Inspecting Kit.

Tramex RH Short Probe Hygro-i RH Short Probe
The most advanced, resilient and reusable RH probe on the market today. Used on conjunction with CMEX II and MRH III moisture meters, the Hygro-i® relative humidity probes allow the user to perform in situ and hood type RH testing.



Tramex RH Long Probe Hygro-i RH Long Probe
The most advanced, resilient and reusable RH probe on the market today. Used on conjunction with CMEX II and MRH III moisture meters, the Hygro-i® relative humidity probes allow the user to perform in situ and hood type RH testing.



Tramex Hygro-i2 Probe for ASTM F2170, Pack of 12 Hygro-i
The all new Tramex Hygro-i2® Relative Humidity probe is the most advanced and resilient RH probe on the market today. Used in conjunction with the Tramex CMEX2 or MRH3 non-destructive moisture meters the Hygro-i2® probe provides measurements of humidity, temperature and dew-point in structural materials.



Tramex Hygro-i2 Probe for ASTM F2170, Pack of 100 Hygro-i
The all new Tramex Hygro-i2® Relative Humidity probe is the most advanced and resilient RH probe on the market today. Used in conjunction with the Tramex CMEX2 or MRH3 non-destructive moisture meters the Hygro-i2® probe provides measurements of humidity, temperature and dew-point in structural materials.



Tramex Hygro-i2 Probe for ASTM F2170, Pack of 6 Hygro-i
The all new Tramex Hygro-i2® Relative Humidity probe is the most advanced and resilient RH probe on the market today. Used in conjunction with the Tramex CMEX2 or MRH3 non-destructive moisture meters the Hygro-i2® probe provides measurements of humidity, temperature and dew-point in structural materials.



Tramex HPW Hole Punch HPW
For creating pilot holes for long pin probes in EIFS & Roofing Systems.



Tramex CALCRH Calibration Check Plate CALCRH
For use with CME, CME4, CRH, CMEX and CMEX II resistance meters.



Tramex PTMCALSET Calibration Check Plugs, Pack of 3 PTMCALSET
Set of 3 calibration check plugs for PTM, COM, MRH3, CMEX2 and WME resistance meters.



Tramex HH14SP200 Heavy-Duty Electrode with Cable and 7" Long Pins HH14SP200
For use with CMEX, MRH3 & PTM meters.



Tramex HA21SP52 Hammer-Action Pin-Type Electrode HA21SP52
Hammer-action pin-type electrode (With Cable And Pins) for use with CMEX II, MRH III, Professional.



Tramex Insulated RH Hood for Surface RH Testing RHIH
Non-destructive Relative Humidity testing for concrete and other floors and screeds, the Tramex Hygrohood is an insulated relative humidity hood used in conjunction with the CMEX2 and the MRH3 together with Hygro-I RH probes.



Ask a question about Tramex Roof Inspecting Kit

Customer Reviews for the Tramex Roof Inspection Kit

More Tramex Products


  • We accept these payment methods:
  • Visa, Master Card, Discover, American Express & PayPal