Rapidly install accurate cycle tracking into standard machinery panels without complex hardware. This electromechanical logging module features simple manual clearing capabilities, ideal for low-voltage manufacturing setups requiring fast, reliable operational counts.
Rapidly install accurate cycle tracking into standard machinery panels without complex hardware. This electromechanical logging module features simple manual clearing capabilities, ideal for low-voltage manufacturing setups requiring fast, reliable operational counts.
The B Series are the perfect all-round counter. A general-purpose, high-performance/low-cost counter for monitoring manufacturing processes, flow totals, and test cycles where an accurate count must be displayed even when power is lost. It utilizes an all-plastic housing and frame to achieve a lower cost without sacrificing quality. Count life is 200 million minimum, with optional speeds to 50 counts per second possible. Spring clip or two screw mountings are standard
Features
| Count Life | 200 million |
| Numbers | 0.160" (4 mm) high |
| Housing | Black plastic |
| Mounting | Spring clip |
| Connections | 0.060" pins with push-on connectors or screw terminals |
| Count Speed with DC | 10 count/seconds |
| Impulse Ratio | 60% on time, 40% off time |
| Operating Voltage | 12 V DC |
| Operating Temp. | 23 to 104°F (-5 to 40°C) |
| Shock | Unit meets IEC 068-2-27 for Shock Stability |
| Vibration | Unit meets IEC 068-2-6 for Vibration |
| Approvals | CE approved |
| Option | 6" (152.4 mm) wire leads |
| Maximum Count Time | Continuous 50/50 or 60/40, on/off |
| Reset | Manual push button |
| Count Life | 200 million |
| Numbers | 0.160" (4 mm) high |
| Housing | Black plastic |
| Mounting | Spring clip |
| Connections | 0.060" pins with push-on connectors or screw terminals |
| Count Speed with DC | 10 count/seconds |
| Impulse Ratio | 60% on time, 40% off time |
| Operating Voltage | 12 V DC |
| Operating Temp. | 23 to 104°F (-5 to 40°C) |
| Shock | Unit meets IEC 068-2-27 for Shock Stability |
| Vibration | Unit meets IEC 068-2-6 for Vibration |
| Approvals | CE approved |
| Option | 6" (152.4 mm) wire leads |
| Maximum Count Time | Continuous 50/50 or 60/40, on/off |
| Reset | Manual push button |
