Achieve permanent, tamper-proof cycle tracking for continuous high-voltage industrial processes. Designed for rigorous environments, this securely fastened electromechanical module provides unalterable operational logs to enforce strict equipment maintenance protocols.
Achieve permanent, tamper-proof cycle tracking for continuous high-voltage industrial processes. Designed for rigorous environments, this securely fastened electromechanical module provides unalterable operational logs to enforce strict equipment maintenance protocols.
The B Series are the perfect all-round counter. A general-purpose, high-performance/low-cost counter for monitoring manufacturing processes, flow totals, and test cycles where an accurate count must be displayed even when power is lost. It utilizes an all-plastic housing and frame to achieve a lower cost without sacrificing quality. Count life is 200 million minimum, with optional speeds to 50 counts per second possible. Spring clip or two screw mountings are standard
Features
| Count Life | 200 million |
| Numbers | 0.160" (4 mm) high |
| Housing | Black plastic, 6-digits |
| Mounting | Screw panel |
| Connections | 0.060" pins with push-on connectors or screw terminals |
| Count Speed with DC | 10 count/seconds |
| Impulse Ratio | 60% on time, 40% off time |
| Operating Voltage | 110 V DC |
| Operating Temp. | 23 to 104°F (-5 to 40°C) |
| Shock | Unit meets IEC 068-2-27 for Shock Stability |
| Vibration | Unit meets IEC 068-2-6 for Vibration |
| Approvals | CE approved |
| Option | 6" (152.4 mm) wire leads |
| Maximum Count Time | Continuous 50/50 or 60/40, on/off |
| Reset | Non-reset |
| Count Life | 200 million |
| Numbers | 0.160" (4 mm) high |
| Housing | Black plastic, 6-digits |
| Mounting | Screw panel |
| Connections | 0.060" pins with push-on connectors or screw terminals |
| Count Speed with DC | 10 count/seconds |
| Impulse Ratio | 60% on time, 40% off time |
| Operating Voltage | 110 V DC |
| Operating Temp. | 23 to 104°F (-5 to 40°C) |
| Shock | Unit meets IEC 068-2-27 for Shock Stability |
| Vibration | Unit meets IEC 068-2-6 for Vibration |
| Approvals | CE approved |
| Option | 6" (152.4 mm) wire leads |
| Maximum Count Time | Continuous 50/50 or 60/40, on/off |
| Reset | Non-reset |
