This is a black and Hi-Viz yellow version of the popular TECH-MCT BLACKOUT, featuring Veto Pro Pac's proprietary V-SWAP™ system. Additional panels are sold separately and can be swapped out to enable tool, gear, or job-specific storage solutions.
This is a black and Hi-Viz yellow version of the popular TECH-MCT BLACKOUT, featuring Veto Pro Pac's proprietary V-SWAP™ system. Additional panels are sold separately and can be swapped out to enable tool, gear, or job-specific storage solutions.
The TECH-MCT SPECIAL OPS edition comes with the V-SWAP Tool Panel and the V-SWAP Meter Panel. Additional panels are available and sold separately.
Features
Keep the Zippers Clean and Lubricated
Over time, dirt and grit will "clog" the zipper coils, preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils, scrub them with soapy water; a toothbrush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax, or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed, the zipper will not function and, in most cases, is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don't Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!
| Internal Volume | 800 in3 (13 L) |
| Maximum Payload | 35 lbs (16 kg) |
| Dimensions | 14 x 12 x 8.5" (35.5 x 30.5 x 21.5 cm) |
| Weight | 7 lbs (3 kg) |
Click on a category to view a selection of compatible accessories with the Veto Pro Pac VPP10856 TECH-MCT Special OPS with 13 L volume and 35 lbs maximum payload.
| Internal Volume | 800 in3 (13 L) |
| Maximum Payload | 35 lbs (16 kg) |
| Dimensions | 14 x 12 x 8.5" (35.5 x 30.5 x 21.5 cm) |
| Weight | 7 lbs (3 kg) |
Click on a category to view a selection of compatible accessories with the Veto Pro Pac VPP10856 TECH-MCT Special OPS with 13 L volume and 35 lbs maximum payload.