The TPI 100 DMM Digital Multimeter features EZ to use one button operation. The meter can automatically measure AC/DC voltage and resistance. It includes a large, 4,000 count display. It can measure up to 600 volts of AC, and DC has a 10M Ohm impedance. Also features a power saving auto-off function.
- TPI 100 DMM Automatic Digital Multimeter
- Automatically Measures AC and DC up to 600 volts,
- Large 4,000 Count Display
- 10M Ohm impedance for measuring resistance
- Power-saving auto-off function turns the device off after 10 minutes of inactivity
- RoHS Compliant
- 3 Year Warranty
- Includes: Batteries, A040 Test, Lead Set, A101 Rubber Boot
Specifications: | TPI 100 DMM Digital Multimeter |
DC Volts Maximum Input: | 600V (Minimum Input = 1.5V); Maximum Resolution: 0.001V Accuracy: +/-0.5 percent |
AC Volts Maximum Input: | 600V (Minimum Input = 1.7V); (Minimum Input = 1.7V) Maximum Resolution: 0.001V Accuracy: +/-0.8 percent |
DC Amps | N/A |
AC Amps | N/A |
Resistance (Ohms) | Maximum Input: 40M ohm Maximum Resolution: 0.1 ohm Accuracy: +/-0.8 percent |
Frequency | N/A |
Capacitance | N/A |
Inductance | N/A |
Temperature (K-Type Thermocouple) | N/A |
Continuity | N/A |
Diode | N/A |
Duty Cycle | N/A |
True RMS Responding | No |
Conductance | No |
Pulse Width | No |
Data Hold | No |
Min/Max Record | No |
Time Stamp Logging | No |
Relative Mode | No |
Compare Mode | No |
RS-232 Output | No |
Process Loop Output | No |
Sleep Mode / Auto Off | No |
Protective Boot | Yes (standard) |
Display Type | 4000 count LCD |
Range Selection | Auto including function selection |
Operating Temperature | 32 degrees F to 104 degrees F (0 degrees C to 40 degrees C) |
Storage Temperature | 14 degrees F to 122 degrees F (-10 degrees C to 50 degrees C) |
Humidity | 80 percent non-condensing |
Size | 6 inch x 3.1 inch x 1.2 inch (187mm x 86mm x 33mm) with boot |
Weight | 12oz (340g) with boot |
Battery Type | 1.5V AA Cell Alkaline (2) |
Battery Life | 500hrs Typical |
Overvoltage Category | CAT III 600V |
Agency Approval | IEC 1010-1 |
Warranty (years): | 3 |
Proposition 65 Warning for California Residents: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Application: |
TPI 100 DMM Digital Multimeter |
Measure line and control circuit voltages | |
Measure resistance of motor windings, transformers, and solenoids | |
Make general AC and DC voltage and resistance measurements | |
Measure the resistance of elements and electric heater cores | |
Test continuity of wiring | |
Verify voltage at breakers and outlets | |
Use as a back-up meter in your tool box |
Related Items
(0)
Coming Soon
Free Shipping.
(0)
In Stock
Free Shipping.
(0)
Coming Soon