TPI 122 Digital Multimeter features 2,000 mvDC (2 DCV) adapter range, 2,000 count display, 0 to 600 volts AC and DC, 0 to 2,000 ohms, Audible continuity, 10 MOHM internal impedance, 0.5 percent DCV basic accuracy, cULus 61010-1,CAT II - 1000V, CAT III - 600V, 3 Year Limited Warranty.
- 2,000 count display
- 0 to 600 volts AC and DC
- 0 to 2,000 ohms
- Audible continuity
- 10 MOHM internal impedance
- 0.5 percent DCV basic accuracy
- cULus 61010-1
- CAT II - 1000V, CAT III - 600V
- 3 Year Limited Warranty
DC Volts Maximum Input: | 600V Maximum Resolution: 1mV Accuracy: +/-0.5 percent |
AC Volts Maximum Input: | 600V Maximum Resolution: 1mV Accuracy: +/-1.2 percent |
DC Amps | N/A |
AC Amps | N/A |
Resistance (Ohms) Maximum Input: | 2K ohm Maximum Resolution: 0.001K ohm Accuracy: +/-0.5 percent |
Frequency | N/A |
Capacitance | N/A |
Inductance | N/A |
Temperature (K-Type Thermocouple) | N/A |
Continuity | Audible at less than 100 ohm |
Diode | N/A |
Duty Cycle | N/A |
True RMS Responding | No |
Conductance | No |
Pulse Width | No |
Data Hold | Yes |
Min/Max Record | No |
Time Stamp Logging | No |
Relative Mode | No |
Compare Mode | Compare Mode |
RS-232 Output | No |
Process Loop Output | No |
Sleep Mode / Auto Off | No |
Protective Boot | Yes (standard) |
Display Type | 2000 count LCD |
Range Selection | Manual |
Operating Temperature | 32 degrees F to 104 degrees F (0 degrees C to 40 degrees C) |
Storage Temperature | 14 degrees F to 122 degrees F (-10 degrees C to 50 degrees C) |
Humidity | 80 percent non-condensing |
Size | 6 inch x 3.1 inch x 1.2 inch (187mm x 86mm x 33mm) with boot |
Weight | 12oz (340g) with boot |
Battery Type | 9V Alkaline (NEDA 1604) |
Battery Life | 500hrs Typical |
Overvoltage Category | CAT III 600V |
Warranty | 3 Years |
Proposition 65 Warning for California Residents: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
HVAC/R APPLICATIONS | |
Line voltage | |
Control circuit voltage | |
Heating element resistance (continuity) | |
Compressor winding resistance. | |
Contactor and relay coil resistance | |
Continuity of wiring | |
ELECTRICAL APPLICATIONS | |
Measure line voltage | |
Continuity of circuit breakers | |
Voltage of direct drive DC motors |
Basic meter
Very bare bones meter, but sometimes thats all you need. Very accurate DC readings.
Did you find this helpful?
1 of 1 Found Helpful
Reviewed by: (Verified Buyer) Volts from United States.
on 3/9/2018
5
Simple Decision
Been looking for a bare bones meter as I dont need most of the features of other DMM's. Great accuracy for my voltage readings and has the resistances as well. Money well spent.
Did you find this helpful?
1 of 1 Found Helpful
Reviewed by: (Verified Buyer) Beadle from US.
on 1/27/2018
5
Related Items
(2)
Coming Soon
Free Shipping.
(0)
Coming Soon