TPI SP323 Smart Temperature Clamp Probe

The TPI SP323 is a smart temperature clamp probe to measure the temperature of air conditioning, heating, and refrigeration systems. Live measurement data from the temperature clamp probe is shown on a smart device via the TPI View App. The TPI SP323 temperature clamp temperature range is -40 to +185 °F (-40 to +85 °C) and has a clamp range of 1/4 inch to 1 1/2 inch (6mm to 38mm).

TPI has a wide range of Smart Probes that connect to your smart device via the TPI View App. See the complete list below.

The SP323 temperature clamp temperature readings can be analyzed over time with the TPI View App data logger, allowing users to identify intermittent problems. Temperature readings are recorded from 1-second to 59-minutes and 59-second intervals and can be logged up to 10,000 readings, each with a date and time stamp.

 

The operational status of the SP323 Temperature Clamp Probe is indicated using a multi-colored LED. The smart temperature probe will auto-power off if not connected to a smart device after 8 minutes. When connected to a smart device, the auto power off is disabled. The auto power off is also disabled during data logging. The TPI SP323 has a battery life of approximately 170 hours.

The TPI View App allows users to display real-time readings in both numerical and graph format. Technicians can use the App's Job Management to create multiple jobs and attach reports to each job while giving each report a different reference or title. Live temperature readings from the SP323 are displayed on the View App, and when used in conjunction with the SP670 Smart Pressure Probe (sold separately), Superheat and Subcooling can be calculated. The TPI SP323 in conjunction with the View App, allows users to perform, save, e-mail, and/or print differential temperature readings such as Radiator Balancing or Flow & Return on Boilers or Heat Pumps.