Tramex WDMK5.1 Water Damage Restoration Master Kit with CMEX2 MEP and Accessories

• **Kit includes CMEX II (CMEX2), MEP, x3 HIPP1-IE Hygro-I probes, IRT2 infrared thermometer, HH14P30 heavy duty pin type probe, SP200 long insulated pins for deep wall inspections, x8 hole liners for concrete flooring RH testing, SAL75 calibration check salts, and heavy duty carrying case**
• Tramex CMEXpert II Concrete Moisture Meter CMEX 2
• Non-destructive meter for measuring moisture content instantly in concrete floors and floor screeds
• Up to 6.9% moisture content readings in concrete
• Easy-to-read blue backlit display
• Data hold function to freeze readings on display
• Measures from 7% to 40% moisture content in wood using optional pin-type probe attachment
• Can also attach to optional relative humidity Hygro-i probe for hood or in situ testing of concrete per ASTM F2170 and BS 8201 and 8203.
• Tramex Moisture Encounter Plus Moisture Meter MEP
• Three ranges of sensitivity (Wood/Timber) (Drywall/Roofing) (Plaster/Brick) make it suitable for various building materials
• Deep signal penetration up to over 1 inch into the materials being tested without the need to damage the surface
• External rubber electrodes make direct contact with the material being tested for best sensitivity and repeatability
• Wide range of readings for wood of 5 percent to 30 percent and 0 to 100 comparative for all other materials
• Large, clear, easy to read display (giving meaningful readings)
• Hold function enables user to "freeze" the reading. Useful for taking readings when the meter face is not visible
• Switchable "On" or "Off" audio warning tone
• Automatic power cutoff switches "Off" when not in use
• Automatic default to last user setting when switched back on
• Battery operated (included)
• Tramex HIPP1 Hygro-I Moisture Probe
• Acclimates quickly
• Reusable - Proves to be the lowest cost per ASTM F2170 test
• Accurate and durable
• Tests per ASTM F2170 and ASTM F2420; Gives in situ relative humidity and ambient RH,
  tempeature, dew point temperature, and grains per pound
• Relative humidity range: 0% to 99%
• Temperature range: -40°F to 176°F (-40°C to 80°C)
• Tramex IRT2 Infrared Surface Non-Contact Thermometer
• -58F° to 1202F° (-50C° to 650C°)
• Switch between C° or F°
• Toggle laser on or off
• Dual laser guidance
• Automatic data hold
• Backlit LCD display
• Indicates when overrange
• Trigger lock
• Displays MAX measurements
• High and low alarms
• Emissivity is adjustable
• Distance to spot ratio 12:1
• Soft carrying case
• All Tramex products carry a full satisfaction guarantee including a one year warranty against defects in parts & workmanship and a refund if the unit is returned, shipping pre-paid, in new condition within 21 days of original delivery. Proof of purchase is necessary.

Tramex Hygro-i In-Situ Probes Overview