1. Home
  2. Brands
  3. TREND Networks
  4. Trend Networks Cable Transmission Testers
  5. Trend Networks SignalTek NT Network Gigabit Tester R156005
Trend Networks SignalTek NT Network Gigabit Tester R156005
Trend Networks SignalTek NT Network Tester R156005

Trend Networks SignalTek NT Network Gigabit Tester R156005

Part Number: R156005
0 Review(s)
The Trend Network (formerly Ideal Networks) SignalTek NT Network and Cable Tester R156005 is a copper and fiber network transmission tester that tests the performance of voice, data, video, and CCTV applications on Ethernet networks. The SignalTek NT fiber network tester proves the performance that copper and fiber networks provide error-free performance up to Gigabit Ethernet transmission rates. Since Trend Netowrks is a new name for Ideal Networks, many network managers can recall this product under the name of Ideal Signaltek NT, or Ideal Networks Signaltek NT.
Retail Price:$2,510.00
On Sale: $2,384.50
Availability: Usually Ships in 3 to 5 Days
Free Shipping.
Write a Review Request a Quote
Authorized Distributor

Trend Networks SignalTek NT R156005 Cable Qualification and Network Tester with Touchscreen

SignalTEK NT - Gigabit Transmission tester for copper, fiber and network/PoE

Formerly Ideal Networks

Save more with Promo Coupon Code - trenddeal
Add the product to the Shopping Cart, Apply Promo Coupon Code and enjoy your Disco

The Trend Network SignalTek NT Network Tester R156005 and cable qualification troubleshooter is a copper and fiber network transmission tester that tests the performance of voice, data, video, and CCTV applications on Ethernet networks. The SignalTek NT network tester proves the performance that copper and fiber networks provide error-free performance up to Gigabit Ethernet transmission rates, making it the ultimate tester for technicians installing, maintaining, or troubleshooting passive cabling and active Ethernet networks where system warranties are not required.

Key Features


  • Includes a touchscreen
  • Network traffic performance test to IEEE802.3ab standard.
  • Gigabit performance testing on passive cabling and active networks
  • Wiremap test for open,shorts, miswires and split pairs to TIA-568 standard
  • Gigabit link verification for copper and fiber cabling
  • PoE/PoE+ verification that displays available voltage at device location
  • Verify network configuration (device IP/ gateway address/subnet mask)
  • Displays port ID of LLDP/CDP – Eliminate manual cable tracing.
  • Simulates VoIP/CCTV/Web/IP video network traffic
  • Copper cable testing – Wiremap and distance to fault using TDR.
  • Stress test network before installing bandwidth hungry devices
  • Cable tracing – Port blink to visually trace cables.
  • Generates PDF test reports to IEEE 802.3ab standard
  • Use Trend AnyWARE app to view and send test reports

Overview


The SignalTek NT Network Gigabit Tester utilizes a test method known in wide area networks as transmission testing to prove the performance of a network by sending real Ethernet data frames through the cabling and/or network devices to compare the error rate against the IEEE802.3ab Gigabit Ethernet standard. This provides a clear standards-based Pass/Fail of the link being tested.

The network transmission tester SignalTEK NT provides greater agility in setting up unique network scenarios -- by simulating actual VoIP, CCTV, web traffic, or IP video services -- technicians can comprehensively test and document that networks will provide flawless data transmission of that application. This testing capability is especially useful before adding new IP devices as it ensures that the network has enough capacity without degrading existing performance or requiring expensive upgrading. As an example, a technician adding IP cameras for video surveillance onto the network can simulate the number of cameras, resolution, and compression time.

SignalTek NT R165005 requires no configuration from the user as the two handsets automatically pair ready for testing: select a usage scenario to simulate the appropriate service from VoIP to CCTV, Video, and web traffic.


In addition, the Trend Network SignalTEK NT uses Time Domain Reflectometry (TDR) to help locate common wiring faults that cause network slow transmission speeds and downtime, such as open and short circuits. It also has several time-saving functions to verify device, network, and internet connectivity, including port speed and duplex status, PoE/PoE+ availability, Port ID with LLDP and Cisco discovery protocol, network configurations, and tone generation for cable tracing.

Installation testing

Cabling:
Network traffic performance test on copper and fiber to IEEE802.3ab standard
Wiremap test for open, shorts, miswires and split pairs to TIA-568 standard
Gigabit link verification for copper and fiber cabling
Use a list of wiremap templates for common Ethernet cable types including CAT 6A/7A/8, and non-Ethernet cable, such as Profinet and ISDN.

Active Network:
Network load testing through switches simulating CCTV/IPTV/VoIP/Web traffic
PoE/PoE+ verification that displays available voltage at device location
Check Ethernet connectivity at device location to 10/100/1000 Mb/s
Verify network configuration (device IP/gateway address/subnet mask)
Switch port identification via LLDP/CDP protocols



Troubleshooting/diagnostic

Cabling:
Distance to fault using TDR technology (copper only)
Ability to identify and trace cables with a compatible amplifier probe (62-164)
Optical power indication (with compatible SFP modules)

Active network:
Network load testing through switches simulating CCTV/IPTV/VoIP/Web traffic
Stress test network before installing bandwidth hungry devices
Port blink to visually trace cable from work area outlet to network switch
Displays port ID of LLDP/CDP enabled switches to eliminate manual cable tracing
Identify network connection problems as hardware, network or configuration faults
Ping local network devices and Internet URL’s
Count number of hops between network points with traceroute tests
PoE load testing to confirm available power meets PoE device requirements

Test Reporting

SignalTEK NT automatically generates test reports in PDF or CSV format. The summary page of each report can be customized to include logo, company, and operator details. Choose between 3 different reports that can show either passed, failed or all test reports in each report:

  • Summary
  • Brief
  • Full


What’s in the Box?


  • Network Transmission Tester
  • 1 x display with touchscreen
  • 1 x remote, 2 x NiMH batteries
  • 2 x patch cables - 12 inch Cat 5e STP
  • 2 x power supply with EU/UK/US adapters
  • 1 x USB Wi-Fi adapter
  • 1 x quick reference guide
  • 1 x carry case
  • One-year warranty

Related Items

Trend Networks R153001 NaviTEK NT Basic Network and Cable Tester (formerly Ideal Networks)
(0)
$870.00 $826.50 Sale
Usually Ships in 3 to 5 Days Free Shipping.
Trend Networks R151005 NaviTEK NT Plus Network and Copper Cable Troubleshooter (Formerly Ideal Networks)
(0)
$1,420.00 $1,349.00 Sale
Usually Ships in 3 to 5 Days Free Shipping.
Trend Networks R151006 NaviTEK NT Pro Copper and Fiber Troubleshooter (Formerly Ideal Networks)
(0)
$1,790.00 $1,579.41 Sale
In Stock - Save w/ Promo Code: trenddeal Free Shipping.

Recently Viewed Items

TOP
0 Items