Triplett 8071 CamView IP Pro Plus Camera Tester for Standard Analog NTSC/PAL and HD Analog Systems

The Triplett 8071 CamView IP Pro Plus is a surveillance camera tester for the installation and maintenance of H.264 IP cameras and analog video cameras NTSC/PAL, AHD 2.0 and HD-TVI as well as ONVIF-enabled IP camera systems. The CamView IP Pro Plus provides an RS485 port for PTZ control of analog PTZ cameras, can provide POE for operating IP cameras as well as 12VDC to power analog cameras. The Triplett 8071 allows you to perform various IP camera tests, Ethernet network test, capture video (snapshots and video recording), playback video, generate video test patterns for monitoring, checking, and even provides a bright flashlight for dimly lit areas. It also can performs additional Ethernet cable testing functions, including TDR (Time Domain Reflectometry) for length and fault checking. It even provides a full, flip-out keyboard (QWERTY) allowing service technician to quickly and easily enter information. The camera tester has a 4" backlit screen with a resolution of 800 x 400.

The IP Camera Tester will guide you through a step-by-step process to test the functionality of IP cameras, whether they are connected to an operating network or directly attached to the tester.

Step 1: Testing Ethernet connections, IP settings, DHCP status/request, or providing DHCP service to a directly connected camera.
Step 2: Discovering camera(s) and showing a video snapshot from the currently selected camera.
Step 3: Display live video from the camera and controlling its PTZ functions (if camera is capable of PTZ).

You can adjust the camera’s settings, and record still images or video from the selected camera. You can also check the audio signal from the camera if it is equipped with a microphone. If the camera is directly connected, the surveillance camera tester will provide PoE voltage to power the camera.

The security camera tester can display the analog video signal input from an attached analog camera or video source with NTSC or PAL format video output. The CamView IP Pro Plus can provide 12VDC (not to exceed 2.0 A) to power the camera. If the camera has an RS485 port for PTZ control, the Analog Camera tester can be used to test that functionality. The HD analog tester provides support for more than 30 PTZ command formats.

You can select from several common video test patterns included in the 8071 CamView IP Pro Plus and generate standard definition analog (NTSC or PAL) format video output. These can be used to test cabling, video recorders, and monitors. The selected video test pattern is displayed on the 8071 4” screen along with the analog video input signal for simple visual comparison.

The Triplett 8071 will automatically detect if a camera needs to be supplied with PoE when an IP camera is directly connected to Network Port 1 (the blue port). Network Port 2 always accepts PoE power to test the PoE output of installed PSE network devices. You may also use the tester’s 12VDC output jack to power analog cameras.

The security camera tester can be used to check audio signal functionality such as microphones or other audio devices through the tester’s internal speaker.

The IP Camera Tester may be used to perform several Ethernet network test functions, including:

The Triplett 8071 CCTV IP HD Tester may be used to check the condition of the RJ45 cable pairs (normal, open, short) and perform a cable length measurement test using TDR.

The HD Analog camera tester will display the analog video signal input from an attached analog camera or video source with AHD or TVI format video output. The 8071 Camera Tester can provide 12VDC to power the camera. If the camera has an RS485 port for PTZ control, the tester can be used to test that functionality. The PTZ camera tester provides support for more than 30 PTZ command formats.

By following the steps provided in the User Manual, it is easy and important to keep your Triplett 8071 CamView IP Pro Plus up-to-date with the most recent firmware as IP and Analog camera standards are constantly evolving.

Any screen shot, video, or ONVIP IP camera report you have saved on your Triplett surveillance camera tester can be exported to your computer.