UEi DL589 TRMS Clamp Meter
The UEi DL589 is a 600A True-RMS clamp meter with a dual backlit screen and all the functions and features needed for HVAC/R Specialists, electrical contractors, general troubleshooting, and facilities maintenance testing applications. The UEi DL589 HVAC clamp meter will measure capacitance, voltage, microamps, circuit continuity, resistance, diode, and temperature via K-Type thermocouples. UEi DL500 series clamp meter comes with different features. Check below to see which DL500 clamp meter works best for your applications.
- True RMS
- Non-Contact Voltage Detection
- 600A AC/DC
- 750V AC / 1000V DC
- Capacitance: 6000µF
- Frequency: 99.99kHz
- LRA Inrush
- Temperature differential
- DC Zero
The UEi DL589 delivers high-performance features and ease of use. The 1.25” fixed jaw clamp meter measures AC current and DC current to 600 A and has NCV detection for high voltage alerts.
Measurements are easily read on the UEi DL589 backlit, high-contrast, dual display. The top reading on the display is amperage as measured by the clamp. The bottom reading can be voltage, resistance, microamps, or capacitance. Functions are easily selected using the rotary selector dial.
The UEi DL589 is a True RMS meter for accurate voltage measurements in noisy environments and also features Low Impedance (Low Z) mode for identifying and eliminating ghost or stray voltages. Without these features, the meter would provide erroneous readings when measuring voltage and currents.
The DL589 clamp meter offers HVAC technicians a temperature range of -328 to 2462° F, capacitance measurements to check the start and run motor capacitors, and DC Microamps for testing flame sensors ensuring the furnace is running correctly and safely. A broken sensor in a gas appliance will prevent the safety valve from opening, hindering the appliance from working properly.
Duty cycle and LRA Inrush current tests are also included on the Clamp meter DL589. The Inrush current is important to measure to verify that the motor is receiving the required Inrush current to support proper motor starts.
In addition, the DL589 features auto-ranging to automatically determine the most appropriate measurement range for the test being conducted.
The HVAC/R clamp meter includes a built-in magnet with a hanging strap, worklight, and auto power off to conserve battery life.
The UEi DL589 can be NIST calibrated. Please contact customer service for Nist calibration.
What’s in the Box?
- DL589 Clamp Meter
- Silicone Test Leads (ATL58)
- Back Probes (APB3)
- Alligator Clips (AAC3)
- Temperature Probes 2 (ATT29)
- Zippered Pouch
- Batteries 4 (AAA)
- User manual
- 2-Year limited warranty
UEi DL500 Series Clamp Meters Available
Dual Display 400A Clamp Meter w/ Test Lead Storage
True-RMS Dual Display 600A HVAC/R Clamp Meter w/ Temperature & Capacitance
True-RMS Dual Display 600A Clamp Meter w/ DC Amps & Differential Temperature