UEI DM525 TRMS 1000V Industrial Wireless Multimeter
The UEi DM525 is a TRMS 1000V Industrial Wireless Multimeter with Power Factor that is designed to meet the needs of professional technicians. The DM525 multimeter offers a full range of functionality 1000 volts, 10 amps, frequency, resistance, diode test, capacitance, continuity and 1 millisecond response fast min/max as well as temperature and Low Z impedance. The UEI DM525 has a safety rating of CATIV 600V and CATIII 1000V.
- High accuracy for commercial and industrial application
- Power Watt Factor measurements
- Wireless capabilities / Free app (iOS & Android compatible devices)
- Low Z impedance
- 6’ Drop protection and an IP42 ingress protection against water and dust
- 24 segment bargraph and 1 ms Fast response Min/Max
The UEi DM525 TRMS multimeter includes LowZ which stands for Low Impedance. This feature presents a low impedance input to the circuit under test. This reduces the possibility of false readings due to ghost voltages and improves accuracy when testing to determine the absence or presence of voltage. The most common places to encounter ghost voltages are blown fuses in distribution panels, unused cable runs, or electrical wiring in existing conduit.
The DM525 wireless multimeter can be used by Technicians who need to calculate Power Factor. The UEi TRMS multimeter will measure Active, Apparent, and Reactive Power or test for low Power Factor on reactive loads, harmonic currents, or imaginary power from motor inductance.
The 24-segment bar graph is shown on the display when in Low Z, Volts AC/DC, Ohms, Continuity, Diode mA AC/DC, mA AC/DC, and Amp AC/DC modes. For signals that change over time, the bar graph can be easier to understand than changing numbers and makes it easy to see trends in fluctuating signals.
The DM525 TRMS multimeter also features a free app available on iOS and Android devices. Once the wireless multimeter is connected, it can graph, log, and email results in a variety of formats.
The DM525 is a True RMS multimeter for precision and accuracy and will measure temperature up to 2462 F. The 1ms Fast response calculation makes it easy to measure voltage or Amps during motor, compressor or transformer startups.
The UEI industrial multimeter allows you to choose between either auto-ranging or manual ranging. In addition, if you press the “hold” button after you have conducted a measurement, the device will store the result until you overwrite it with a new one or press the “hold” button again.
The UEi DM525 also includes the Min/Max mode. This mode allows you to see the highest and/or the lowest readings that are measured on the component or circuit. This gives you an idea of any trends that are occurring to better enable you to diagnose issues.
The DM525 TRMS multimeter has a large, bright, backlit display, easy-to-use buttons, work light, protective boot, and a built-in kickstand. In addition, the multimeter has a low battery warning and auto power-off to save battery life. The rubberized boot offers both impacts and drops resistance protection and is rated IP42.
What’s in the Box?
- Silicone test leads (ATL57) without caps
- Alligator clips
- Fast Fuse: 600ma/1000V and 11A/100V
- Batteries 4 x AA
- Instruction manual
- 2-year limited warranty
Other UEi digital multimeter available: