| Specifications: | UniSource DS-1200 Digital Oscilloscope 200MHz |
| Vertical system |
| Bandwidth | 200MHz |
| Channel | CH1, CH2 |
| Vertical Resolution | 8bit |
| Vertical Sensitivity | 2mV/div -50V/div, 1-2-5 14 step |
| Simulation bandwidth | -3dB |
| Rising time | ≤1.8ns (200MHz), ≤3.5ns (100MHz),
≤5.8ns (60MHz),≤8.7ns (40MHz), ≤14ns (25MHz) |
| Input impedance | 1MΩ ±2%, 20pF±5 |
| Max safe input voltage | 400V(DC+AC peak) / frequency≤400Hz
(when input impedance is 1MΩ) |
| Horizontal system |
| Mode | CH1, CH2, CH1±CH2, CH1×CH2, CH1/CH2, FFT |
| Sampling Rate | 500MS/s ~ 1GS/s |
| Equivalent sampling rate | 50GS/s |
| Waveform interpolation | Sin(x)/x |
| Record length | ≥4kB/CH, expandable to 256MB or 512MB |
| Horizontal working mode | Primary sweep, primary sweep + delay expansion sweep and X-Y / 1-2-5 |
| Timebase range | 50s/div~1ns/div(200MHz),
50s/div~5ns/div(100MHz)
50s/div~10ns/div(60MHz, 40MHz),
50s/div~20ns/div(25MHz) |
| Timebase accuracy | ±100ppm |
| X-Y | X (CH1) frequency bandwidth : DC ~ full bandwidth (-3dB)
Phase potential difference :≤3° when 5MHz
|
| Trigger |
| Trigger source | CH1, CH2, EXT, city electricity |
| Trigger sensitivity | inner:≥1div (frequency upper limit is 40MHz)
≥2div (frequency is more than 40MHz)
≥2div, ?V, ?T, 1/?T
out :≥100mVp-p frequency upper limit is 40MHz
≥200mVp-p frequency is more than 40MHz
≥200mVp-p, TV-V, TV-H video trigger
|
Auto trigger range
| 100Hz~100MHz square signal |
| Trigger level range | Int. trigger:±4div / Ext. trigger:±1.6V |
| Trigger mode | Edge trigger : Rise along, drop along
Impulse trigger : More than, equal to and less than setting pulse width.
Video trigger : TV-V, TV-H
Slope trigger :more than, equal to and less than setting time
|
| Cursors |
| Measurement | ?V, ?T, 1/?T |
| Auto measure | •Voltage parameter:
Max, Min, peak-peak value, top value, bottom value, amplitude value,
root-mean-square value, average value, overshot, pre-shot, damp.
•Time parameter:
Cycle, frequency, rising time, fall time, positive pulse width, negative pulse width,
positive ratio, negative ratio, delay 1-2 |
| General |
| Display | 5.7 inch color LCD display |
| Display screen | 320 pixel (horizontal) × 234 pixel (vertical) |
| Display type | dot, vector |
| Display mode | Normal, Flat, Average, Peak value, Afterglow |
| Output interface | USB, RS232, J45 Ethernet interface(Optional) |
| Storage | Setting / Waveform storage : 10 groups |
| Power supply | AC 100V~240V ±10% / 45Hz~440H / about 25W |
| Temperature | Working: 0?~+40? / Storage : -40?~+60? |
| Humidity | Working : 40? / (20~90)%RH / Storage : 50? / 90%RH, 24h |
| Size/ Weight | 300mm×150mm×130mm / 2.5Kg (net weight) |
Proposition 65 Warning for California Residents: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to 
