UniSource FG-8110 10MHz Sweep Function Generator features 4 in 1 Sweep, Function & Pulse Generator and Frequency Counter. Includes Versatile waveforms for Sine, Square, Triangle, Ramp, Pulse, Sawtooth and DC outputs
- UniSource FG-8110 10MHz Sweep Function Generator
- 4-in-1 Sweep, Function & Pulse Generator and Frequency Counter
- Versatile waveforms for Sine, Square, Triangle, Ramp, Pulse, Sawtooth and DC outputs
- 0.1 Hz to 10 MHz Frequency Out put in 7 Ranges
- Built in 7digits External Counter Display measuring up to 110MHz
- Internal and External linear Sweep control from 1:1 to 100:1
- Variable Symmetry for generating Sawtooth and Pulse waveforms
- TTL leveled Square waveform output
- Variable DC Offset control
- Variable Output level control with 20 dB Attenuator and Amplitude control
Specifications | UniSource FG-8110 10MHz Sweep Function Generator | |
OutputCharacteristics | Waveforms | Sine, Square, Triangle, Ramp, Pulse, Sawtooth, TTL Leveled Square, DC |
Frequency Range | 0.1Hz to 10MHz in 7 Range (1,10,100,1K,10K,100K,1M) | |
Frequency Accuracy | ± 5% of full scale | |
Output Level | 20Vp-p in open circuit, 10Vp-p into 50? Load | |
DC Offset Control | More than +/-5V (into 50ohm) | |
Output Impedance | 50?±5% | |
Attenuator | -20dB fixed and continuously variable | |
Waveform Characteristics | Sine wave | Flatness : ±0.3dB to 10MHz Distortion : Less than 1% at 0.1Hz to 100KHz |
Square wave | Rise and Fall time : Less than 25nSec | |
Triangle wave | Linearity : More than 99% at 0.1Hz to 100 kHz | |
TTL Output | Rise and Fall time : Less than 25nSec Output Level :TTL Level ( H ; Higher than 2.4V, L ; Lower than 0.4V) | |
Symmetry Variation | 1 :1 to 10 : 1 | |
Sweep Function Characteristics | Mode | Linear |
Width | Variable from 1 :1 to 100 : 1 | |
Rate | 0.5Hz to 50Hz(20mSec to 2Sec) | |
External VCF Input | Input Voltage 0 to 10V Input Impedance : Approx. 10 kohm | |
Frequency Counter Characteristics | Display | 7digit Green LED, Overflow, Gate time, MHz, kHz, Hz, mHz, |
Frequency Range | 200mHz to 110MHz with Auto Range | |
Accuracy | +/- Timebase Error+/- 1Count | |
Low pass Filter | -3dB, 100kHz | |
Input Sensitivity | 100mVrms | |
Time base | 10MHz Crystal, 20ppm | |
Max. Input Voltage | 250Vpp | |
General | Power Requirement | 115 or /230 VAC ± 10%, 48 to 66Hz |
Operating Temperature | 0 to 50? (Accuracy specified at 25 ± 5?) | |
Dimension | 9.45x10.63x3.54in (240 X 270 X 90mm) | |
Weight | Approx. 6.6lbs (3 kg) | |
Standard Accessories | Power Cord, BNC Cable, Fuse, Instruction Manual |
Proposition 65 Warning for California Residents: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Related Items
(0)
Coming Soon
Free Shipping.
(0)
Coming Soon
Free Shipping.
(0)
Coming Soon
Free Shipping.
(0)
Coming Soon
Free Shipping.