Viasensor G100-01N CO2 0-20% Incubator Analyzer with RH Probe monitors CO2 and RH for verifying incubators in the IVF, research, medical, and pharmaceutical markets. CO2 is measured by a custom dual wavelength infra-red sensor with reference channel.
Key Features:
By utilizing IR technology, the Viasensor G100-01N has greatly improved accuracy and response time compared to traditional chemical methods. The RH probe plugs directly into the port and has a 15mm diameter probe tip. Monitoring CO2 and atmospheric levels in incubators is crucial to the successful growth of cell cultures and embryos and having a simple to operate analyzer is vitally important.
The Viasensor G100-01N is lightweight and has an easy to read LCD display with LED backlight when needed. The internal pump has a flowrate of roughly 100 cc/min and features a built-in gas dryer tube that removes moisture.
The G100-01N has ports for two temperature probes that can be purchased separately. Viasensor backs this incubator analyzer with a 1 year warranty. Made in the UK
Please Note: Viasensor also recommends users to self calibrate the unit roughly once a month using the optional G-CALKIT Calibration Kit (Calibration gas sold separately).
The Viasensor G100-01N includes the following:
Key Features:
- Large easy to read display
- Includes RH Probe
- Quick verification of CO2 incubator levels
- Built in gas moisture removal
By utilizing IR technology, the Viasensor G100-01N has greatly improved accuracy and response time compared to traditional chemical methods. The RH probe plugs directly into the port and has a 15mm diameter probe tip. Monitoring CO2 and atmospheric levels in incubators is crucial to the successful growth of cell cultures and embryos and having a simple to operate analyzer is vitally important.
The Viasensor G100-01N is lightweight and has an easy to read LCD display with LED backlight when needed. The internal pump has a flowrate of roughly 100 cc/min and features a built-in gas dryer tube that removes moisture.
The G100-01N has ports for two temperature probes that can be purchased separately. Viasensor backs this incubator analyzer with a 1 year warranty. Made in the UK
Please Note: Viasensor also recommends users to self calibrate the unit roughly once a month using the optional G-CALKIT Calibration Kit (Calibration gas sold separately).
The Viasensor G100-01N includes the following:
- Measures CO2 from 0-20%
- 15mm RH Probe
- Battery Charger
- Sample Tube Kit
Looking for other measurements or CO2 ranges? Check out these configurations below.
Viasensor G100-00N - same unit without RH Probe Port
Viasensor G100-10N - No RH Port; adds an O2 sensor measurement from 0-100%
Viasensor G100-11N - adds both the RH Probe and the O2 Sensor
Viasensor G110-00N - changes the CO2 sensor to measure 0-100%
Viasensor G150-00N - changes the CO2 sensor to measure 0-10,000ppm