Viasensor G100-10N CO2 (0-20%) Incubator Analyzer with O2 (0-100%) monitors CO2 and O2 for verifying incubators in the IVF, research, medical, and pharmaceutical markets. CO2 is measured by a custom dual wavelength infra-red sensor with reference channel and O2 is measured with an internal electrochemical cell that has an approximate 3 year lifetime in air.
Key Features:
The internal pump has a flowrate of roughly 100 cc/min and features a built-in gas dryer tube that removes moisture. The G100-10N has ports for two temperature probes that can be purchased separately. If a relative humidity reading is necessary, Viasensor offers the Viasensor G100-11N which has a RH port and includes a RH probe with a 15mm dia tip. Viasensor backs this incubator analyzer with a 1 year warranty. Made in the UK.
Please Note: Viasensor also recommends users to self calibrate the unit roughly once a month using the optional G-CALKIT Calibration Kit (Calibration gas sold separately).
Key Features:
- Large easy to read display
- Quick verification of CO2 incubator levels
- Built in gas moisture removal
The internal pump has a flowrate of roughly 100 cc/min and features a built-in gas dryer tube that removes moisture. The G100-10N has ports for two temperature probes that can be purchased separately. If a relative humidity reading is necessary, Viasensor offers the Viasensor G100-11N which has a RH port and includes a RH probe with a 15mm dia tip. Viasensor backs this incubator analyzer with a 1 year warranty. Made in the UK.
Please Note: Viasensor also recommends users to self calibrate the unit roughly once a month using the optional G-CALKIT Calibration Kit (Calibration gas sold separately).
The Viasensor G100-10N includes the following:
- Measures CO2 from 0-20%
- Measures O2 from 0-100%
- Battery Charger
- Sample Tube Kit
Looking for other measurements or CO2 ranges? Check out these configurations below.
Viasensor G100-01N - adds a 15mm RH Probe
Viasensor G100-00N - No O2 sensor, measures CO2 from 0-100%
Viasensor G100-11N - adds both the RH Probe and the O2 Sensor
Viasensor G110-00N - changes the CO2 sensor to measure 0-100%
Viasensor G150-00N - changes the CO2 sensor to measure 0-10,000ppm