Viasensor G110-00L Industrial CO2 Analyzer 0-100%
- Large easy to read display
- Quick verification of CO2 levels
- Built in gas moisture removal
The CO2 sensor is a dual wavelength IR cell that includes a reference channel. The Viasensor CO2 Analyzer G110-00L has great accuracy at +/- 1% of range + 2% of reading at reference conditions. Ports are included to add up to two optional temperature probes. The Viasensor G110-01L includes a port for RH Probe if relative humidity monitoring is required.
The G110 series analyzers have a large easy-to-read LCD display that incorporates an LED backlight when necessary. The internal pump has a typical flow rate of 100 cc/min and includes a built-in gas dryer tube to remove moisture. Optional software (G-SW) is available to analyze data and event logs.
Viasensor offers a standard 12 month warranty on their analyzers. Made in the UK.
Please Note: Viasensor also recommends users to self calibrate the unit roughly once a month using the optional G-CALKIT Calibration Kit (Calibration gas sold separately).
The Viasensor G110-00L includes the following
- Measures CO2 from 0-100%
- Battery Charger
- Sample Tube Kit
Looking for other measurements or CO2 ranges? Check out these configurations below.
Viasensor G110-01L - adds a 15mm RH Probe
Viasensor G110-10L - Adds O2 sensor that measures from 0-100%
Viasensor G110-11L - adds both the RH Probe and the O2 Sensor (0-100%)
Viasensor G100-00L - changes the CO2 sensor to measure 0-20%
Viasensor G150-00L - changes the CO2 sensor to measure 0-10,000ppm