Viasensor G150-01N Carbon Dioxide (0-10,000 ppm) Analyzer with RH Probe

Viasensor G150-01N Carbon Dioxide (0-10,000 ppm) Analyzer with RH Probe monitors CO2 from 0-10,000 ppm most commonly needed in the medical, laboratory, and site auditing industries. The CO2 sensor is a dual wavelength IR cell that includes a reference channel and has a response time less than or equal to the 20 seconds.

Key Features:

• Large easy to read display
  
• Quick verification of CO2 levels for site audits
• Built in gas moisture removal
• Data logging for long term application
  

The Viasensor G150-01N has great accuracy at +/- 0.2% (typical at 5% CO2). Ports are included to add optional two temperature probes (sold separately). The G150 series analyzers have a large easy-to-read LCD display that incorporates an LED backlight when necessary. The internal pump has a typical flow rate of 100 cc/min and includes a built-in gas dryer tube to remove moisture.

Optional software (G-SW) is available to analyze data and event logs. Viasensor offers a standard 12 month warranty on their analyzers. Made in the UK.

Please Note: Viasensor also recommends users to self calibrate the unit roughly once a month using the optional G-CALKIT Calibration Kit (Calibration gas sold separately).

The Viasensor G150-01N includes the following:

• Measures CO2 from 0-10,000 ppm
• 15mm RH Probe
  
• Battery Charger
• Sample Tube Kit

Looking for other measurements or CO2 ranges? Check out these configurations below.

Viasensor G150-00N - No RH Probe; Measures CO2 from 0-10,000 ppm

Viasensor G150-10N - Adds O2 sensor that measures from 0-100%

Viasensor G150-11N - adds the RH Probe and the O2 Sensor (0-100%)

Viasensor G100-00N - changes the CO2 sensor to measure 0-20%

Viasensor G110-00N - changes the CO2 sensor to measure 0-100%