- Large easy to read display
- Quick verification of CO2 levels for site audits
- Built in gas moisture removal
- Data logging for long term application
The O2 sensor is an electrochemical cell that has an approximate lifetime of 3 years in air. Ports are included to add optional two temperature probes (sold separately). The included relative humidity probe has a 15mm diameter probe tip with an option for a 4mm version if that is needed .
The G150 series analyzers have a large easy-to-read LCD display that incorporates an LED backlight when necessary. The internal pump has a typical flow rate of 100 cc/min and includes a built-in gas dryer tube to remove moisture. Optional software (G-SW) is available to analyze data and event logs.
Viasensor offers a standard 12 month warranty on their analyzers. Made in the UK.
Please Note: Viasensor also recommends users to self calibrate the unit roughly once a month using the optional G-CALKIT Calibration Kit (Calibration gas sold separately).
The Viasensor G150-11L includes the following:
- Measures CO2 from 0-10,000 ppm
- Battery Charger
- Sample Tube Kit
Looking for other measurements or CO2 ranges? Check out these configurations below.
Viasensor G150-01L - adds a 15mm RH Probe and 5mm Temp Probe
Viasensor G150-10L - adds O2 sensor that measures from 0-100%
Viasensor G150-00L - No RH Probe or O2 sensor, measures CO2 from 0-10,000 ppm
Viasensor G100-00L - changes the CO2 sensor to measure 0-20%
Viasensor G110-00L - changes the CO2 sensor to measure 0-100%