Wohler Perlon Fiber Star Chimney Cleaning Brush 6 - 16"

The Wohler Perlon Fiber Star Chimney Sweeping Brushes are used along with their Viper systems for light condition cleaning in stainless steel chimney ducts. The center hole is 1.1" (28mm) in diameter and can be used for all Wohler Viper systems except for the Mini and Compact.

Star brushes are attached to the Viper by removing the end cap and sliding it through the end of the rod and onto the star holder. The star holder can fit up to two star brushes to improve sweeping power.


What sizes of brushes are available?

• 6" Diameter - Model Number 13715
• 8" Diameter - Model Number 13720
• 10" Diameter - Model Number 13725
• 12" Diameter - Model Number 13730
• 16" Diameter - Model Number 24
  

What Brush Size and Type is right for me?

Brushes should be roughly 2" larger than the diameter of the duct being cleaned to ensure proper contact with the duct walls.

Wohler Brush Parts List


Brush Types:

Stainless Steel Crimp Wire: Thin stainless steel wires that have been crimped. Excellent for soft to medium soot in all chimneys.

Stainless Steel Flat Wire: Premium flat wire for harder deposits in masonry/tile chimneys.

Perlon: Black plastic fiber for light condition sweeping in stainless steel chimneys. Heat tolerant to 122°F.

PEK: High Tech Synthetic Fiber for light condition sweeping in stainless steel chimneys, ducts, or pellet stoves. Heat tolerant to 300°F (Higher Temperature tolerance available).