Wohler Viper M Vent Duct Chimney Cleaning Tool Wohler 7648 with GRP rod is used for cleaning flue gas systems. The Wohler 7648 is operated utilizing the push-pull technique for sweeping chimneys and ducts up to 10" diameter.
Key Features:
The GRP (glass fiber reinforced plastic) rod (0.3" Diameter) has a resistant coat and length marking to keep track of how far into a duct run you are. The integrated brush holder can hold up to 2 star type brushes and be capped with an M10 threaded brush to create a custom brush for your application.
This chimney cleaner weighs approximately 5 lbs and can be easily clipped to a belt for operation on a roof. Made in Germany.
*** Due to the variety of uses and needs, Viper cleaning systems do not include a cleaning brush. ***
Brush Buying Tips:
Brushes should be roughly 2" larger than the diameter of the duct being cleaned.
Wohler Brushes
Brush Types:
Stainless Steel Crimp Wire: Thin stainless steel wires that have been crimped. Excellent for soft to medium soot in all chimneys.
Stainless Steel Flat Wire: Premium flat wire for harder deposits in masonry/tile chimneys.
Perlon: Black plastic fiber for light condition sweeping in stainless steel chimneys. Heat tolerant to 122°F.
PEK: High Tech Synthetic Fiber for light condition sweeping in stainless steel chimneys, ducts, or pellet stoves. Heat tolerant to 300°F (Higher Temperature tolerance available).
Key Features:
- 65 ft of 7mm diameter GRP Rod
- Lightweight - sweep chimney from above or below
- Integrated holder can carry up to 2 star style brushes
The GRP (glass fiber reinforced plastic) rod (0.3" Diameter) has a resistant coat and length marking to keep track of how far into a duct run you are. The integrated brush holder can hold up to 2 star type brushes and be capped with an M10 threaded brush to create a custom brush for your application.
This chimney cleaner weighs approximately 5 lbs and can be easily clipped to a belt for operation on a roof. Made in Germany.
*** Due to the variety of uses and needs, Viper cleaning systems do not include a cleaning brush. ***
Brush Buying Tips:
Brushes should be roughly 2" larger than the diameter of the duct being cleaned.
Wohler Brushes
Brush Types:
Stainless Steel Crimp Wire: Thin stainless steel wires that have been crimped. Excellent for soft to medium soot in all chimneys.
Stainless Steel Flat Wire: Premium flat wire for harder deposits in masonry/tile chimneys.
Perlon: Black plastic fiber for light condition sweeping in stainless steel chimneys. Heat tolerant to 122°F.
PEK: High Tech Synthetic Fiber for light condition sweeping in stainless steel chimneys, ducts, or pellet stoves. Heat tolerant to 300°F (Higher Temperature tolerance available).