Bridging a direct digital controller to a pneumatic actuator, this transducer converts a 0-5 V DC input into a 0-15 psi branch output. Dual valves hold branch pressure once the setpoint is reached, so the transducer stops consuming air between corrections. A high-flow port drives larger actuators without a booster. A panel gauge shows the delivered pressure during commissioning.
Bridging a direct digital controller to a pneumatic actuator, this transducer converts a 0-5 V DC input into a 0-15 psi branch output. Dual valves hold branch pressure once the setpoint is reached, so the transducer stops consuming air between corrections. A high-flow port drives larger actuators without a booster. A panel gauge shows the delivered pressure during commissioning.
Pneumatic actuators outlive the controls that drive them, and replacing a floor of them costs far more than converting the signal. The PXP Series sits between the two: a direct digital output goes in, regulated branch air comes out, and the existing actuator keeps working. Choosing between the single and dual valve versions comes down to air consumption -- the single valve bleeds continuously through a 0.010 in orifice, while the dual valve holds pressure between corrections and draws air only when the setpoint moves.
Features
Applications
| Gauge Pressure Range (Gauge Models) | 0 to 30 psig (0 to 200 kPa) |
| Gauge Pressure Accuracy (Gauge Models) | ± 2.5% Midscale (± 3.5% Full Scale) |
| Output Pressure Accuracy | 1% full scale @ room temperature | 2% full scale across |
| Feedback Signal Output Range | 0 to 5 V DC = Output Span |
| Input Signal Source (@ Impedance) | 0 to 5 V DC @ 10,000 Ω | 0 to 10 V DC @ 10,000Ω | 0 to 15 V DC @ 10,000Ω | 0 to 20 mA @ 250Ω |
| Manual / Auto Override | MAN function = output can be varied | AUTO function = output is controlled from input signal |
| Supply Current | 160 mA maximum, 200 mA on fail safe models |
| Supply Voltage | 24 V AC (±10%), 50 or 60Hz, 24 V DC (+10%/- 5%) |
| Connections | 90° Pluggable Screw Terminal Blocks |
| Connections | Pneumatic Tubing Size-Type | 1/4" O.D. nominal (1/8" I.D.) polyethylene |
| Terminal Block Torque Rating | 0.5 Nm (Minimum); 0.6 Nm (Maximum) |
| Wire Size | 16 (1.31 mm2) to 26 AWG (0.129 mm2) |
| Air Flow | Supply valves @ 20 psig (138 kPa) main/15 psig (103 kPa) out, 750 scim (1400 on LG model) Branch Line requires 2 in3 or 33.78 cm3 (min.). Branch line min. of 25 feet of 1/4" O.D. poly tubing |
| Air Supply Pressure | Maximum: 25 psig (172.369 kPa) | Minimum: 18 psig (124.106 kPa) |
| Field Calibration Possible | 0 to 15 psig (0 to 103.421 kPa) maximum |
| Pneumatic Fitting | Removeable brass barbed fittings for Main and Branch in machined aluminum manifold Plugged 1/8-27-FNPT gauge port | Gauge installed at additional cost |
| Operating Humidity Range | 10 to 95% non-condensing |
| Operating Temperature Range | 35 to 120°F (1.7 to 48.9°C) |
| Storage Temperature | -20 to 150°F (-28.9 to 65.5°C) |
| Snaptrack Flammability Rating | UL94 V-0 |
| Snaptrack Material | Polyvinyl Chloride (PVC) |
| Product Dimensions (L x W x H) | 3.80 x 2.30 x 2.85" (96.5 x 58.4 x 72.4 mm) |
| Product Weight | 0.49 lbs (222 g) |
| Gauge Pressure Range (Gauge Models) | 0 to 30 psig (0 to 200 kPa) |
| Gauge Pressure Accuracy (Gauge Models) | ± 2.5% Midscale (± 3.5% Full Scale) |
| Output Pressure Accuracy | 1% full scale @ room temperature | 2% full scale across |
| Feedback Signal Output Range | 0 to 5 V DC = Output Span |
| Input Signal Source (@ Impedance) | 0 to 5 V DC @ 10,000 Ω | 0 to 10 V DC @ 10,000Ω | 0 to 15 V DC @ 10,000Ω | 0 to 20 mA @ 250Ω |
| Manual / Auto Override | MAN function = output can be varied | AUTO function = output is controlled from input signal |
| Supply Current | 160 mA maximum, 200 mA on fail safe models |
| Supply Voltage | 24 V AC (±10%), 50 or 60Hz, 24 V DC (+10%/- 5%) |
| Connections | 90° Pluggable Screw Terminal Blocks |
| Connections | Pneumatic Tubing Size-Type | 1/4" O.D. nominal (1/8" I.D.) polyethylene |
| Terminal Block Torque Rating | 0.5 Nm (Minimum); 0.6 Nm (Maximum) |
| Wire Size | 16 (1.31 mm2) to 26 AWG (0.129 mm2) |
| Air Flow | Supply valves @ 20 psig (138 kPa) main/15 psig (103 kPa) out, 750 scim (1400 on LG model) Branch Line requires 2 in3 or 33.78 cm3 (min.). Branch line min. of 25 feet of 1/4" O.D. poly tubing |
| Air Supply Pressure | Maximum: 25 psig (172.369 kPa) | Minimum: 18 psig (124.106 kPa) |
| Field Calibration Possible | 0 to 15 psig (0 to 103.421 kPa) maximum |
| Pneumatic Fitting | Removeable brass barbed fittings for Main and Branch in machined aluminum manifold Plugged 1/8-27-FNPT gauge port | Gauge installed at additional cost |
| Operating Humidity Range | 10 to 95% non-condensing |
| Operating Temperature Range | 35 to 120°F (1.7 to 48.9°C) |
| Storage Temperature | -20 to 150°F (-28.9 to 65.5°C) |
| Snaptrack Flammability Rating | UL94 V-0 |
| Snaptrack Material | Polyvinyl Chloride (PVC) |
| Product Dimensions (L x W x H) | 3.80 x 2.30 x 2.85" (96.5 x 58.4 x 72.4 mm) |
| Product Weight | 0.49 lbs (222 g) |
